Fits Eufy 1080P wired and wireless and 2k wired and wireless doorbells only.Eufy Dual doorbell owners will want a different nearlynewmodels mount from doorbellmounts.com/products/eufydual . This does NOT fit RING doorbells.

Featured on Youtube and made and designed by Nearlynewmodels.

*Does NOT fit on Dutchlap style siding (Dutchlap siding has a flat front that proceeds into an angled top that slants backwards towards the house. ) For Dutchlap vinyl siding please contact me for custom order as every Dutchlap siding panel is different and these have to be made to fit your siding dimensions.

Please see pictures.

Colored shim to fix the angled doorbell problem where your doorbell when screwed to angled siding this will make the doorbell face straight ahead instead of slanted upwards.  Choose a color that’s close to your siding color or choose black to match the back of the Ring Doorbell.

Has pre drilled recessed holes and comes with matching rust resistant screws to mount (other vendors online do not have right size holes or screws)

Printed on high quality settings on quality printer (other vendor online is selling miscalibrated ugly versions with inconsistent print quality. Even tells you in ad that his are “seconds” on quality

not one size fits all. My mounts fit a specific version of doorbell. (Competitors mounts are all the same for 3 different doorbells )

my mount is solid. (Competitor is printing his hollow)

i offer installation technical support via a paper instructions document a YouTube install video and email support.

this is my design I drew it and own it and can make changes to make it better (competitor is selling a design they downloaded for free off the internet)

Has a sleek minimalist design (other vendors online are selling bulkier models)

Is made from a more expensive weather resistant plastic up to 176 degrees F (other vendors online parts are made from cheap PLA plastic that can only withstand 110 degrees F)

if unsure what siding you have please use messaging to send a picture.

Now ships with printed installation instruction sheet. Comes with two longer screws. All mounting hardware you need is included. Video Doorbell not included.

3" Standard Vinyl Option
This is a specialty Vinyl siding. Not as common as the 4 inch or 4 1/2 inches siding.
Comes 3 slats per panel. This is for Vinyl siding that has Panels that measure exactly 3 inches each.
Standard Option means the panels are not exactly flat on the front they have a slight curve.

4" Standard Vinyl Option (common)
This is a common Vinyl siding.
Comes 2 slats per panel. This is for Vinyl siding that has Panels that measure exactly 4 inches each.
Standard Option means the panels are not exactly flat on the front they have a slight curve.

4.5" Standard Vinyl Option (common)
This is very common Vinyl siding.
Comes 2 slats per panel. This is for Vinyl siding that has Panels that measure 4.5 inches - 5" tall.
This mount designed to fit snug top to bottom on 4.5" siding.
If used on any siding larger than 4.5" inches there will be a small gap above the mount equal to the difference between 4.5" and 5" inches.
For eaxmple. if this mount is installed on 4 3/4" siding there will be a 1/4 gap between the bottom of one panel and the top of the mount. Most people
The gap does not bother and the gap is purely cosmetic.
Standard Option means the panels are not exactly flat on the front they have a slight curve.


3" Board/Metal Option (common) [NEW ITEM]
This is for Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
Usually comes in single 1 slat per board. This item is for Panels that measure exactly 3".

4" Board/Metal Option (common)
This is for Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
Usually comes in single 1 slat per board. This item is for Panels that measure  4" tall.


4.5" Board/Metal Option (common)
This is for Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
This mount designed to fit snug top to bottom on 4.5" siding.
If used on any siding larger than 4.5" inches there will be a small gap above the mount equal to the difference between 4.5" and 5" inches.
For eaxmple. if this mount is installed on 4 3/4" siding there will be a 1/4 gap between the bottom of one panel and the top of the mount. Most people
The gap does not bother and the gap is purely cosmetic.
Usually comes in single 1 slat per board. This item is for Panels that measure from 4.5" up to 5" tall.


5"-6"+ Board/ Metal Option [NEW ITEM]
This is for Hardi board, Cement board, Cedar, Aluminum, Shake Vinyl, Standard Vinyl, etc. basically this is universal for any flat or slanted front siding that is larger than 5".
If your panel is 5 inches or longer you may want this version. It does not have the standoff legs. This version allows you to place your doorbell anywhere on the panel. Perfect for if you want you doorbell higher, lower or centered on the panel. It still has the Siding angle built in so doorbell faces straight ahead.
This is the version you want if you want a 5-7% vertical shim or vertical wedge like what ring provides with the ring 2 and ring pro to angle your existing camera up or down.
 This is the version you want if you have flat siding (brick, stucco, etc) and want to angle your nest up or down 7%
This is the version you want if you have angled siding such as vinyl siding but your doorbell is too low and you want it angled up or down more. this will angle the doorbell up addition 7 degrees on angled siding.
(This item is not pictured)