12v Compact Air Conditioning Unit 2x 55mm Outlets
Our most compact combination Air Conditioning unit is perfect for lightweight vehicles with small interior volumes, these units are compact yet powerful for their size.
A lightweight centrifugal fan is used to blow air through the air conditioning core and expel it through 2x 55mm (2.17") outlet nozzles. The fan has an onboard 3 speed resistor pack for fan speed control.
For the most efficient operation the unit should be mounted within the vehicles interior so that it may recirculate the interior air.
Onboard electronic thermostat to prevent condensation from freezing and blocking the air conditioning core.
| Specification | Metric | Imperial & Other |
| Cooling Capacity | 4.1 kw | 13,990 BTU |
| Airflow | 280 m3/hr | 165 cfm |
| Weight | 3.5 kg | 7.7 lbs |
| Air Nozzle Size | 2x ∅ 55mm | 2x ∅ 2.17" |
| High Pressure Connection | 5/8"-18 UNF-2B (3/8" SAE) O-Ring Male | |
| Low Pressure Connection | 7/8"-18 UNS-2B (5/8" SAE) O-Ring Male | |
| Noise Level | 60 dB (Max Fan Speed) | |
| Voltage | 12v | |
| Current Continuous | 11.25a | |
| Power Consumption | 135w | |
| Fan Speeds | 3 Speed | |
| Enclosure Construction | ABS Plastic Enclosure | |
| Heater & AC Core Design | Copper Tubes with Pressfit Aluminium Fins | |
| Refrigerant Compatibility | R-12, R-22, R-134a, R-502, MP39, MP66, R404a, R1234yf | |
| Part Number | 358-0E2-587 | |
| Quantity | Item |
| 1x | Compact Air Conditioning Unit 12v |
| 2m | 10mm Drain Hose |
| 1x | 10mm 'T' Piece |
| 4x | Right Angled BZP Steel Mounting Brackets |
| 4x | Bolts & Serrated Washers |
Please wire up the AC unit as per the wiring diagram below, if you have any questions please don't hesitate to get in touch with us.
Condenser Fan: If you are mounting your condenser radiator in front of your engine radiator then you may use your existing electric engine radiator fan to cool the condenser when required. You simply need to 'T' into the trigger feed on the electric fan relay. If you are installing this into a classic car with a viscous fan then you will need an additional electric fan on the front of the condenser.
Fan Control Switch: The fan uses an onboard resistor pack, therefore only a 4 position switch is required to operate.
Purple Thermostat Wires: It does not matter which way around the purple wires are connected.
| Wire Colour | Use |
| Yellow Wire | Fan - Low Speed |
| Orange Wire | Fan - Medium Speed |
| Red Wire | Fan - High Speed |
| Black Wire | Fan - Earth |
| Purple Wire 1 | Thermostat - Condenser Fan Relay & Pressure Switch |
| Purple Wire 2 | Thermostat - Earth |
- Please note that this unit does not have a heater core, please see our HVAC model for a combined Heat/AC unit.
- This is not a complete kit, you will require a 4 Position Fan Switch, A/C ON/OFF Switch, a Condenser radiator, a Compressor, a Receiver/Dryer Bottle, Binary or Trinary Switch, Hoses etc.