Made of strong ductile iron and galvanized to resist rust, these swing hangers feature an “oil lite” bronze bearing and axle bolt.  Use on wooden swing frames.  Plate is 5 1/4” x 2” with ½” holes that are 3 3/4” center to center.  Holds up to 5000 lbs.  This listing is for a PAIR (does not include snap hooks).

Installation: Hangers should be spaced 2 ft from the end of the set and 2 ft a part for each swing.  Bolt hanger to wood beam with ½” bolts with the length depending on thickness of wood. (Bolts not included.)  Grease or oil bushings if squeaking noises are heard.  You will need to use S-hooks or shackles from the chain to the swing hangers.   Make sure the S-hooks are closed to within .04 to meet ASTM safety standards.  To do this you will need to use our S-hook pliers or a regular pair of channel lock pliers.  WARNING: Once the S-hooks have been opened they will have to be replaced to avoid injuries from coming open and/or breaking.  Make sure that if you are using shackles they are also tightened.  

Safe Use:  This is for children 5-12 year olds only.  Not for Adults.   Adults should supervise children at all times.  Do not allow children to stand on or use unsafely.  Do not allow it to be used if damaged. 

Maintenance: Do the following to reduce the chance of serious injuries.  Check monthly for cracks, rust, missing rivets, open S-hooks or evidence of vandalism such as cutting, metal showing through the material or bent seats from children standing on them.  Tighten and lubricate all metallic moving parts per manufacturer’s instructions.  Check all protective coverings on nuts, bolts, pipes, edges, corners and all moving parts including swing hangers, swing seats, ropes, cables, chains, shackles, pendulums for excessive wear and tighten bolts.  Replace as needed.  Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around playground equipment.  In high use areas these inspections should be done more frequently.   Clean with mild soap and water when you do the monthly maintenance checks.   

Our Ductile Swing Hanger is our most popular swing hanger. This top-of-the-line wood beam swing hanger is galvanized, made of ductile iron and has a steel pivot bolt that suspends a tough bronze bushing.  This is the perfect swing hanger to be used for both residential and commercial playgrounds!

Swing Hanger Features
- Galvanized hardware
- Constructed of heavy duty ductile iron
- Steel pivot bolt that suspends a tough bronze bushing
- Two pre-dilled holes for bolting to wood beam
- Sold as a pair (2 swing hangers)

***CARABINERS IN FIRST PHOTO NOT INCLUDED.