This item is a set of track laying templates used to accurately lay flexible track on your layout.
The radii match those used by Hornby, Peco and Bachmann(Branchlines) allowing flexible track to be laid to conform to their same geometry.
You can now lay a track plan from any of the above manufacturers substituting flexible track for the manufacturers Set Track.
- Four radii 371mm, 438mm, 505mm and 572mm.
- OR 14.6", 17.2", 19.9" and 22.5".
- These match to 1st, 2nd, 3rd and 4th radius curves respectively.
- Plus a Straight section.
- All templates at least 18" or 470mm long.
- Laser cut from 3mm MDF.
- HO/OO scale. 16.5mm gauge.
- Any questions please ask. 0416036185
- SHOULD YOU REQUIRE THEM, WE CAN PRODUCE CUSTOM TEMPLATES TO ANY RADII OR GAUGE/SCALE.
Instructions for use:
Simply fit between the rails to hold the track in position and pin the track down through the slots.
1. Gently bend the track so that the template fits between the rails.
2. Position the track and template as required.
3. Drill a clearance hole for the track pins in one sleeper in each of the slots in the template as required.
4. Place track pins in the holes and gently tap in to secure the track.
4. Place track pins in the holes and gently tap in to secure the track.
4. With the track pins in position lift the template from the track.
5. Drive the pins home as required.
Thanks for looking at our item.
Oh!..... don't forget to look at the many other listed items in our eBay Store.
