Description

 
・Equipped with a phonoequalizer amplifier, records can be played by connecting an analog player.
The equalizer amplifier uses a CR type with an emphasis on sound quality, and the cartridge supports both MM and MC types.

・The equalizer amplifier uses a low-noise selective OP amplifier (socket type that can be replaced with another OP amplifier).

・The flat amplifier section uses vacuum tubes 12 AU7 (ECC 82), and the gain can be switched about 3 times and 1 time.

・The power supply uses an R core transformer with low leakage flux, and the B power supply uses an FET ripple filter.
 In addition, direct current lighting of the vacuum tube completely suppresses hum noise.

・Coupling capacitors have sufficient space to be replaced with larger ones

・Size and design are the best match with our company's power amplifier "6L6GC single vacuum tube amplifier kit [TU -8200]"

・The power supply is equipped with a power transformer that can support four power supply voltage bands (selected at the time of assembly) so that it can be used overseas.


[Specifications of TU -8500]

Used Vacuum Tubes, etc., 12 AU7 (ECC 82) x 2
OP-AMP: 2 NJM 2068 DDs
Input jacks RCA jack 4 systems (PHONO, LINE 1 ~ 3)
1 x 3.5 mm Stereo Jack (LINE 3 Priority Input)
Output terminal RCA jack 1 system (PRE OUT)
Power Supply Voltage AC 100 V 50/60 Hz IEC 3P Inlet Type
*Can be changed to 115 V, 200 V, 230 V specifications during assembly
Rated power consumption 8W
Body Dimensions W 252 x H 73 x D 270 mm (Including Protrusion)
Body Weight approx. 3.1 kg (Completed with no power cord)
[Flat Amplifier Section]

Gain 3.1 times (9.8 dB)/1.15 times (1.2 dB)
Frequency Characteristics (-3 dB): 2 Hz to 70 kHz/2 Hz to 280 kHz
Signal to noise ratio (IHF-A) 122 dB/129 dB
Maximum output voltage 22 Vrms (1 kHz)
[Equalizer Amplifier Section]

Compatible Cartridge MM (LOW)/MC (HIGH) Switch Back
Gain (1 kHz) [MM] 37 dB/[MC] 63 dB
Signal to noise ratio (IHF-A) [MM] 108 dB/[MC] 88 dB
Input Resistance [MM] 50 kΩ/[MC] 100 Ω
Maximum output voltage 7.4 Vrms (1 kHz)

*As this product is an assembly kit, the warranty of general household appliances does not apply.
Inspection and repair are available for a fee to the manufacturer. In that case, there will be a shipping fee, return fee, and repair fee.
read the instructions carefully and check it.

If you need repair parts due to loss or damage, you can purchase them separately.
In that case, shipping fee, return fee and parts fee will be charged.