Compatible with BMW M Sport M Performance ///M Sport Brake Caliper Decals Stickers  - Set of 4

These die-cut decals are made from high performance high-temperature vinyl films.  These decals come in a range of sizes for easily match the needs of your vehicle. Easy application with clear application/transfer tape.

Other colours available (GLOSS WHITE, MATTE WHITE, GLOSS BLACK, MATTE BLACK, DARK GREY, GREY, SILVER and GOLD)

All colours available in Gloss Finish

Black and White is available in both Gloss and Matte finish

All caliper decals are made from high quality ORACAL vinyl, but these are not original (OEM) product. 

***Please pay close attention to the set sizes, make sure you did all the measurements and ensure you have enough clearance on your caliper before placing order. ***

**If you want other colours or sizes, please specify at check out (Message the Seller)**

They come in 1 sizes, total of 4 Decals

Four 1.4" (Suitable for BMW F3x, F2x, F8x)

No shrinkage <0.006

High and low temperature resistant          Yes

Salt water resistant                                       Yes

Minimum life expectancy                             8 years

Minimum Application Temperature           7°C/46°F (Dry application)

MADE IN CANADA 

INSTALLATION INSTRUCTIONS:

FOR BEST RESULTS, APPLY DECALS IN A WARM DRY ENVIRONMENT (12°C/55°F and above)

1. Thoroughly clean surface with rubbing alcohol or soap and water

(Rinse thoroughly making sure no residue is left on the surface)

2. Firmly press or rub a squeegee on the clear transfer tape

3. Peel the WHITE backing paper off the decal, making sure decal is sticking on the CLEAR transfer tape

(If the decal is stuck on the white backing paper, go back to step #2)

4. Carefully align decal on to desire surface, press firmly on the decal and squeegee out bubbles if visible.

5. Slowly peel CLEAR transfer tape off at a steep angle

(Peeling transfer tape at a steep angle will avoid decal coming off with transfer tape)

(If decal comes off with transfer tape, repeat step #4)

*Durability depends on condition of surface and method of application.

Thanks for looking