Kit contains 1 x 250ml resin and instruction booklet.
Transparent inner coating that prevents rust formation on the inside tank surfaces and provides long-term protection against corrosion in any tank.
A tank inside of a tank
WAGNER Single-Component Tank Sealing Resin saves any tank, by installing a protective inner tank, so to speak. Even fuel tanks that are already damp or weeping liquid are usually 100% leak proof after sealing!
Durable Petrol- and Acid-Resistant Coating
WAGNER Single-Component Tank Sealing Resin is resistant to leaded and unleaded fuel, ethanol/petrol blended fuels such as E5, E10 and E85, pure ethanol, pure petrol (gasoline), two-stroke mixtures, diesel fuel, aviation fuel, motor oil, transmission oil, hydraulic oil, mineral oil, synthetic oil, two-stroke oil, brightstock, coolant, and additives, such as WAGNER Bactofin Fuel Stabilizer.
Easy application due to single component formula
As opposed to most two-component sealing compounds, WAGNER Single-Component Tank Sealing Resin does not become brittle and permanently retains a minimum amount of flexibility. This is very important as it means the inner coating bonds reliably even in case of later damage to the tank due to vibrations or minor accidents. In addition, the single-component material hardens slower, therefore giving the user more time to ensure correct sealing and to get the flowing material to all critical surfaces.
Scope of Application
WAGNER Single-Component Tank Sealing Resin seals tank interiors made of steel (also alloys), aluminium, stainless steel, copper, brass and plastics such as carbon, GFRP, Kevlar, polyester or vinylester.
Even new tanks with smooth inner surfaces can be sealed with WAGNER Single-Component Tank Sealing Resin; roughening is not necessary.
Note: WAGNER Tank Sealing Resin cannot be used on tanks made of polyethylene or polypropylene, since these materials cannot be coated permanently.
Application & Dosing
other sizes available from our ebay shop.
175 ml are sufficient to seal a tank of a volume of up to 10 litres.
250 ml are sufficient to seal a tank of a volume of up to 30 litres.
500 ml are sufficient to seal a tank of a volume of up to 80 litres (without baffle plates) or 60 litres (with baffle plates).
After the necessary preparatory works Pour the needed quantity of WAGNER Single-Component Resin into the tank and shake vigorously; then carefully slosh it around. The resin should completely saturate all inner walls.
When the inner coating is dry to the touch and no longer sticky (after 12 - 24 hours), a second layer can be applied.
The hardening time of the inner sealing in the tank is about 7 to 8 days.
make sure that the sealer is completely cure
d before filling tank with petrol.