|
|
|
|
Booster
1.High gain (70db), enhances the signal up to 1000x, work for band 12/13/17/5/2/4/25 compatible with all US & Canada carriers, including: At&t, verizon, t-mobile, sprint, u.s. Cellular, bell, telus, rogers, fido, sasktel, mts, etc across north america.
2.Sturdy aluminum case with integrated heat sink and led status lights. Excellent heat dissipation and electromagnetic radiation protection.
|
Dual Interior Antennas
Provides two zones of coverage in any size home or office. This is the best solution especially if the target coverage area is a two-story building, or if the internal building can't be covered by one antenna because of building materials that block cell signal (plaster, concrete, metal, UV-coated glass, etc.)
|
Log periodic antenna
Powerful outside directional antennas, pick up weak signal over long distance, maximum communication distance range up to 3~5 miles.
|
RG6 Cable
1.3*30+1*15 Feet Professional industry level quality, ultra low loss.
2.It can be flexibly combined to solve various two-story buildings / multi-rooms, or it is impossible to cover an internal building with an antenna because the building materials block the cell signal.
|
Coverage ability
|
|
|
|
Two Key Factors
The size and the coverage area and the strength of the boosted signal are directly related to two key factors:
1.Signal strength received by the outdoor unit. So, setting up the outside antenna where the signal is the strongest will provide the best results.
2.Distance of separation between the outdoor antenna and the indoor unit.
|
Outdoor Signal Level 1 Bar(-100dBm)
Coverage up to 1,000 sq ft, suitable for 2 story home, or small offices and workplaces with multi-room( Caution: Not recommend when outdoor signal less than -100dbm).
|
Outdoor Signal Level 2-3 Bars(-90dBm)
Coverage up to 4,000 sq ft, suitable for 2 story house, or middle size office with multi-room.
|
Outdoor Signal Level 4~5 Bars(-80dBm)
Coverage up to 8,000 sq ft, suitable for 2 story building, or big size office/warehouse with open space.
|
Installation
|
|
|
|
Installation Step 1: Mount the outside antenna
Use an existing pole to mount the outside antenna on your roof on the side of the house with the strongest signal.
|
Installation Step 2: Inside Antenna Installation
The inside antenna should be facing the location of the signal dead zone/weak signal area inside the building
|
Installation Step 3: Mount the booster
Choose a ventilated and dry place
|
Installation Step 4: Connect two antennas and booster to splitter
A high-quality splitter is available to distribute the signal into the two interior antennas.
|
Legal Disclaimer
This is a CONSUMER device. Before use, you must register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. AT&T, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards.
|