New for
Summer 2021 from Tony Ray Aeromodel is the
Boeing
P26 Peashooter
The best kit
yet.
As usual the
instructions are by download. We will give the link after purchase on dispatch.
The Golden Age of Aviation just got smaller
No CAA registration required
Engineering in Balsa and Ply. Tony's kits are traditional balsa material, but they are aimed at modelers who like to get their teeth into a 'build'. They are not conventional kits and so don't expect them to be like Dumas or Guillows. If fact sometimes experience of traditional model aircraft can be a handicap. There is a photo manual of what part attaches to what part.
Building on this one is a 3/5
Flying is 5/5
Not for Beginners -
While the building is marked at 3/5 where 5 is most difficult and while the model could be built by someone with a limit experience of building balsa models, flying is 4/5 (which is experienced flyer with flying time on aerobatic low wing aircraft.1/5 is Beginner, 2/5 Novice Flyer 3/ 5 Experienced Flyer, 4/ 5 Experience in Low Wing Types, 5/5 Difficult to fly Bicycle Clip Rating.)
The model is so realistic and a pleasure to build it can be built as a static model, this sort of model looks great in a Baby's Bedroom as a 'posh' mobile.Its so light it moves in the air currents of the house which can be quite hypnotic to watch.
Amazing….
The model includes an 8.5mm Brushed Motor with matched Prop and Gear Box. Note the motor is a tight fit in the gear box and warming the gearbox housing in very hot water ( be careful not to get burned) the case can become easier to fit the motor, when the heat goes it is tight around the motor. Its our tip to avoid bent prop shafts. Never press the motor in by the shaft. But hey? you knew that anyway. Broken motors from incorrect assembly are not a warranty claim.
Have fun, building
and flying this model. Note although it comes with the Motor and Prop there is
no R/C. Its good at using donor RC from ParkZone and E Flite or similar models.
We would advise to buy the kit, study the options, and follow the instructions.
Contact details supplied after purchase we can’t before as its against eBay rule.
Dispatch Time 1 to 2 Days Usually - Dispatched from the UK no Tariffs or Duties to Pay.
Vat is included at 20% UK
Overview
The Boeing P-26 "Peashooter" was the first
American production all-metal fighter aircraft and the first pursuit monoplane
to enter squadron service with the United States Army Air Corps. Designed and
built by Boeing, the prototype first flew in 1932, and the type was still in
use with the U.S. Army Air Corps as late as 1941 in the Philippines. There are
two surviving Peashooters, but there are three reproductions on display with
two more under construction.
The project funded by Boeing to produce the Boeing Model 248
began in September 1931, with the US Army Air Corps supplying the engines and
the instruments. The open cockpit, fixed landing gear, externally braced wing
design was the last such design procured by the USAAC as a fighter. The Model
248 had a high landing speed, which caused a number of accidents. To remedy
this, flaps were fitted to reduce the landing speed. The Army Air Corps ordered
three prototypes, designated XP-936, which first flew on 20 March 1932.
The "Peashooter", as it was known by service
pilots, was faster than previous American combat aircraft. Nonetheless, rapid
progress in aviation led to it quickly becoming an anachronism, with
wire-braced wings, fixed landing gear and an open cockpit. The cantilever-wing
Dewoitine D.500 flew the same year as the P-26 and two years afterwards the
Soviet I-16 was flying with retractable landing gear. By 1935, just three years
after the P-26, the Curtiss P-36, Messerschmitt Bf 109 and Hawker Hurricane
were all flying with enclosed cockpits, retractable landing gear and cantilever
wings. However, some P-26s remained in service until after the United States
entered World War II in December 1941.
The Model
The P-26A Peashooter is yet another eye-catching flying
model from Tony Ray's Aero Model. This classic WWII all metal fighters will
make an impact wherever it is flown. With comprehensive step by step instructions,
you can take to the skies in your very own faithful recreation of this famous
aircraft.
Features
All balsa and hardwood (Basswood) is Laser Cut.
Some hardware is included, but you will also require other
items to finish this model.
Great for flying outdoors in small spaces, parks etc. on
calm days, the model is also suitable for indoor Flying. Needing the space of 1
to 2 Badminton Courts space to fly.
Required to Complete
You will need a 3 to 4 function Radio Transmitter and
Receiver as 3 or 4 functions used on the model aircraft (suitable micro
receiver board and servos are available but we do not have them on eBay. We
advise customers to get the kit and see the kit, instructions and see what they
have already that might work or contact SWM for one of the various solutions
they have regard RC)
Specifications
Wingspan: 381mm (15in)
Scale: 1:20
Receiver (required): Micro receiver (at least 4channels,
e.g. Super-Micro Receiver boards) Not included with the kit
Servo (required): 1.7g Micro Servo
Battery (required): <200mAh 1S Li-Po Battery
We do not have collections from our address but we can
arrange collections from the Steve Webb Models premises. After purchase please
let us know.