Pairing Instructions (The control must be paired
before the fan will operate.)
- Turn OFF power at the breaker for at least 30 seconds
- Turn ON power at the breaker
- Within 3 minutes of restoring power
to the fan, press both the Fan button and the Light button for at least
4 seconds. Your fan will turn on low to
indicate successful syncing. If it does
not, turn off power to your fan, wait
1 minute then try again. If using the
transmitter with multiple fans, repeat
this process for each fan.
- IMPORTANT: Use the pull-chain switch on the fan to set the fan speed to the HIGH position before operation.