 |
|
The LED Plus model is a 90-degree, 105-degree Angle with 8 watts. Use 3 blue light plus 1 purple light high-power chip. The effect of light can be seen that the light transmittance of the light cross lens reaches 97%. It is more convenient to light solidify the molars inside the mouth. ！！！Because the light emitted by one of the purple LEDs is invisible to the human eye, the LED lights appear to have only three lights on during use. INSTALLATION:- • Insert light head into the curing light handpiece with a twisting motion，Ensure that both the direct light source head and the light curing host are fully connected to their corresponding positions • Connect the connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsorbed on other metal surfaces. • After switching on the power , insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up • The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging. • When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full。 • The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use。 • To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low • When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility OPERATION:- • Turn on the curing light with on/off switch • his machine has 1S high power. 3S high power. full RAMP PULSE 3'+3'+6'+6'seven working modes. The default mode is (full power) and the default time is 10 seconds. • Press and hold the time button for 0.1 seconds to select the time.Only three time modes of FULL RAMP PULSE can be selected, which are 05 10 15 20 25, respectively. • Long press mode button 0.5 seconds to unlock, mode selection can be made, when no operation 30S automatically unlock, and long press mode button 0.5 seconds to unlock. • Every change of time or mode, there will be a ‘beep’ sound. The curing light will keep the last program selected in memory • Put on the disposable curing light sleeve to cover the whole curing light for cross-infection control. Then put on the light protective shield and light head protective ring, the curing light is ready for use • Remove and dispose of the curing light sleeves after every patient • Curing light will automatically turn off if not in use for 1 minute SPECIFICATION: Power supply:Input: AC 100-240V, 50/60Hz Output :DC 5V/1A Intensity High: 2500 mw/cm² Battery: 3.6V, 2600 mAh (9.36Wh) Handpiece dimension: Φ3.0 cm x 24 cm Packing List: Main unit of the LED x1 Protective light shield x1 Transformer (100 -240V) x1 USB Type-C Chrging line x1
|
|
|
|
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:Dentalbravo City,State:SHENZHEN,China Telephone number:0755-36925817 |
|
|
Exchanges are offered for items that are defective or damaged when received, although this is highly unlikely. After exchanges are made and
have not resolved the issue, we will refund the cost of the merchandise.
Defective items or problems with your order must be reported within 3 days after receiving. Please keep all packaging, documentation, packing list,etc. that came with your order. These will be used to verify claims if there is any problem with you. Restocking fee will be charged for returned items without original package or any quality problem.Please contact us for details before returning your package to avoid misunderstanding. IMPORTANT: Customer's item must be returned to our facility with the ROF (Return Order Form) at the buyers shipping expense. |
|
|
The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. 
|
|
|
We accept PayPal only. If you are planning on combining your items, please make sure that you wait until ALL auctions have ended before you visit the checkout. All items must be paid within 7 days. |
|
|
Serivce is our 1st priority at Baistra!
If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at Baistra. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right! |
