Leather Craft Electric Creasing & Edging

Machine Iron Tip Handle Rest Stand Tool

220/110V 4kind

We sell only high quality tools!

Excellent price!

Excellent quality!

Equal to or better than similar store brand-name!

This four creasing edging press line heads are

suitable for the edge crimping of all leather goods.

>>>There are a lot of ways of using electric creasing & edging machine in leathercraft.

With heating irons it is easy to polish leather surfaces, make professional edge finishing,

paint decorative grooves on leather, make patterns. 1#,2# tips generally are

used while creasing tight curves. 3# tips are professional creasing tips for bank

card position. 4# tips are used creasing round leather corners.

>>>Electric creasing & edging machine tools are time-saving tools, which allow you to

do the work much faster and with higher quality. You just need to turn on the Machine,

Which regulate the power, attach the handle to this machine and screw the iron into

handle. Regulate the power presicely to material you use and you can start working.

Leather Burning Machine. This apparatus transfers power and regulates the handle

temperature. You can use only one handle while working the machine.

>>>There is “on-off” power switch button and one LV output with 0 V to 16V electronic

controller on the front panel. Machine comes with removable but durable 1.5m (4.9ft)

power cable. This is a reliable well-made electric edging and creasing machine.

All irons are made of steel, brass and are carefully polished before being fitted with

their heating resistance. These accessories are screwed directly into the handles.

We provide a great number of accessory tips for all of your leather working needs!

1# : Plane Creasing Tips

Material: Steel & Brass

Thickness/Width of Line:  0.5mm (0.02”)

Line Length of Tool:  25mm (0.1”)

Total Length of Tool:  67mm (2.6”)

Description:

1# Creasing Tips are creasers which don't have the edge guide. These are used to

crease your leather without being limited to edges. Many bookbinders use them to

Make gold foil creases or they simply can be used in a similar way as the "wax spatula"

to finish wax on your edges. All irons are made of steel, brass and are carefully

polished before being fitted with their heating resistance.

These accessories are screwed directly into the handles.

2# : Filleteuse Creasing Tips

Material: Steel & Brass

Total Length of Tool: 67 mm (2.6”)

Crease Distance From Edge of Leather: 0.8mm

Crease Thickness: 1.0mm

2# Tips are creasers with a guided edge that follow the edge of your leather and

Makes a beautiful crease on all types of leather. Tips have two edges - one that

Rides on the side of your leather edge, and one that rides on the top of the leather.

The iron heats the wax and paint on the leather's edge, creating a smooth surface.

It also creates a small decorative line on the top of the leather.

3# : Professional Bank Card Position Creasing Tips

Material: Steel & Brass

Total Length of Tool: 67 mm (2.6”)

Crease Distance From Edge of Leather: 0.8mm

Crease Thickness: 1.0mm

3# are professional creasing tips for bank card position,creasers with a

guided edge that follow the edge of your leather and makes a beautiful

crease on all types of leather. Tips have two edges - one that rides on the

side of your leather edge, and one that rides on the top of the leather.

The iron heats the wax and paint on the leather's edge, creating a smooth

surface. It also creates a small decorative line on the top of the leather.

4# : Round Creasing Tips

Material: Steel & Brass

Total Length of Tool: 67 mm (2.6”)

Crease Distance From Edge of Leather: 0.8mm

Crease Thickness: 1.0mm

This 4# round tip is similar to 2# tip, but the creasing edge has a round

shape. 4# has the same usage as the 2# tip, but it is much easier to

manoeuvre in curved and rounded corners and edges with rounded head.

Tip consists of two rounded lines – the guide and the creaser. As you can

See in the pictures, the guide is slightly longer than the creaser. The guide

burnishes the side of theleather and gives you a control while creasing a

line on the top of the leather. You can also use a wax, paraffin or dye to

finish the leather edge. This iron melts any type of compounds for finishing

leather surfaces Providing a great professional-looking result.

220V Electric Edging & Creasing Machine

220V International Version

If US & Canada 110-120V Version ---

Please Addition Our 150 Watt 110/220V Bidirectional

Electricity Converter AC Adapter

This electric creasing & edging tool is a very popular product for master creating

iconic creased and polished edges.This machine will substantially reduce the amount

of time you spend on your edges and will give your projects a polished high-end look.

Accessories that are made to last.

220V International Version Model Machine Apparatus

Input Voltage: 220V~240V

Frequency: 50~60Hz

Removable 1.5m (4.9ft) power cable supply flex.

3-Pin Female Cable Connector

Male Plug Diameter: 25mm , Female Jack Diameter: 25mm.

Metallic Box Apparatus Dimensions:

Width: 150 mm (5.9”)  Depth: 210mm (8.3”)

Height: 80 mm (3.2”)  Weight: about 1500g (3.3lb)

Electric Heating Head Temperature: 0-450°C

A total of 9 temperature control gear position, each gear position

temperature is about 50 degrees.use 5 Gear position for cowhide

press line, for special leather materials, such as: crocodile, ostrich and

other press lines reduce the gear position.Turn on the power switch,

the red light flashes frequently, indicating that the work is normal.

Instructions for use:

--Preparing the unit for use

--Connect handle to low voltage apparatus output

--Connect machine to mains supply

--Switch on by pressing the switch button at the front panel

--Regulate the power presicely to material you use

--Start using

--Switching off the unit and changing the tool

--Cut off the power supply using the switch button at the front

--Make sure the tool is cold before unscrewing it

then screw on an other tool

--Switch off the device and when it has cooled down, replace the head.

--Switch unit on start using again.

IMPORTANT:

Before using the machine apparatus, check the indicator light

“On - Off” switch button  on the front is on “Off”

Safety Instructions:

Only use this machine with the electrical tools recommended by the supplier.

Do not use this machine for any other purpose. This machine is designed

for use indoors and in dry conditions only. While the machine is on operation,

the tool is hot. Be careful for the handling. When you stop working do not

put the handle with the tool in contact with objects.

Wood Handle Tool

Brand new straight wood handle for electric creasing & edging machine.

3-Pin Male Cable Connector

(Male Plug Diameter: 25mm , Female Jack Diameter: 25mm)

Material: Wood, Stainless Steel.

Handle Length:  200 mm (7.8”)

Handle Diameter: 29 mm (1.14”)  Cord Length: 1.5m (4.92ft)

The handle transfers the power from electric edging and creasing machine to the

Iron to heat it. Wooden handles are solid and long enough that you can use your

Shoulder to guide and push it over tough material. It is very easy and comfortable

to work because  they have very flexible long power cords. You can keep your

machine on the big distance from your working place for the best possible operation.

Don’t try to plug the handle in wall outlet! The handle can be plugged directly into

Electric Edging and Creasing Machine only!

150 Watt 110/220V Bidirectional Electricity

Converter AC Adapter

● No exchange sound  ● AC-AC bidirectional electricity converter

● For travelling or imported elecrtical equipments use

Color: White  Material: Plastic Brand: SINGWAY Model: SW-S11

Weight (approx.): 800g

Size: 108 x 67 x 53 mm / 4.25 x 2.63 x 2.08 inch (L x W x H)

Function: Bidirectional electricity converter Electricity converter rate (approx.): 50%

Theoretical rated power (approx.): 150W Max. Suggested using power (approx.): <75W

Switch on AC 117V: Input 110V/120V, Output AC 220V/240V

Switch on AC 230V: Input 220V/240V, Output AC 110V/120V

AC 117V suit for using in: America,Canada,Japan,Brazil,Taiwan,Mexcio etc,.

AC 230V suit for using in: China,European Union Countries,Middle East etc,.

Warning:

Before using must choose the bottom switch .If switch to AC 117V,namely the input AC

117V/120V, then output AC 220V/240V. If switch to AC 230V,namely the input AC 220V/240V,

then output AC 117V/120V. Do not dial the wrong switches to use. (It's very imporment )

Note:

Do not use a elecrtical equipments which power is over 75W on this converter. The rated power is

the theoretical capacity of this converter,but not the real using capacity. The real capacity of the

power supply might be 50% of the rated power. Do not use this converter in its full capacity, it

might be over heated,cause fire or ant other dangers. Any of the high-power elecrtical equipments

are strictly prohibited to be used on this converter. Due to the light and screen difference, the item's

color may be slightly different from the pictures. Please understand. Make sure you don't mind

before you bid. Please allow 1-5mm differences due to manual measurement.

Wooden Rest Stand Machine For Handle

Material: High Quality Hardwood

Original Wood Color, No Paint, Senior Hardwood,Feel Comfortable!

SIZE:

Length-210 mm (8.25”)  Width-70 mm (2.75”)  Height-50 mm (2”)

Round Groove Width - 37mm (1.5”)  Weight - 227g (0.6lb)

When you work with Electric Creasing & Edging Machine, you need a place where

you can put your handle while the iron is cooling or heating.It’s an easy-to-use and

indispensable tool for your work. It’s made of beautiful wood and You can keep all

types of handles on it, include Regad, Adece handles.

4 Kinds Of Tool For You To Choose:

No.1:  1pc 220V Electric Edging & Creasing Machine

+ 4pcs Creasing Tips - 1#/2#/3#/4#

+ 1pc Wood Handle

No.2:  1pc 110/220V Adapter

+ 1pc 220V Electric Edging & Creasing Machine

+ 4pcs Creasing Tips - 1#/2#/3#/4#

+ 1pc Wood Handle

No.3:   1pc 220V Electric Edging & Creasing Machine

+ 4pcs Creasing Tips - 1#/2#/3#/4#

+ 1pc Wood Handle

+ 1pc Wooden Rest Stand

No.4:  1pc 110/220V Adapter

+ 1pc 220V Electric Edging & Creasing Machine

+ 4pcs Creasing Tips - 1#/2#/3#/4#

+ 1pc Wood Handle

+ 1pc Wooden Rest Stand

As picture show