Instructions
Principle of the CMS70A Pulse Oximeter is
as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in
accordance with Capacity Pulse Scanning & Recording Technology,the Pulse
Oximeter can be used in measuring the pulse oxygen saturation and pulse rate
through finger.The product is suitable for being used in family, hospital,
oxygen bar, community healthcare, physical care in sports (It can be used before
or after doing sports, and it is not recommended to use the device during the
process of having sport) and etc.
Major Features
- Operation of the product is simple ,low
power consumption
- SpO2 value
display
- Pulse rate value display, bar graph
display
- PI
display
- Pulse waveform display
- Menu operation
- Screen brightness can be
changed
- The
display mode can be changed
- Pulse rate sound indication, it can be
turned on or turned off
- With measured data overruns limits and
low-voltage alarm function,the upper/down alarm range can be
adjustable
- Battery capacity
indication
- Low-voltage indication: low-voltage
indicator appears before working abnormally which is due to low-voltage, and
with alarm function
- Connected with an external oximeter
probe
- Data storage function,and the storage data
can be uploaded to computer
- Real-time data can be transmitted to
computers
Main performance
- Display Mode: TFT Screen and LED
display
- c
- SpO2 Measuring Range:
0%~100%(the resolution is 1%)
- Accuracy: 70%~100%: ±2%, Below 70%
unspecified.
- PR
Measuring Range: 30bpm~250bpm(the resolution is 1bpm)
- Accuracy: ±2bpm or ±2% (select
larger)
- Measurement Performance in Weak Filling
Condition:SpO2 and pulse rate can be shown correctly when
pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is
±2 bpm or ±2% (select larger).
- Resistance to surrounding light: The
deviation between the value measured in the condition of man-made light or
indoor natural light and that of darkroom is less than ±1%.
- Power Consumption: About
350mA
- Voltage:AC 100~240V,
50/60HZ
- Power Supply: Built-in recharge Li-Polymer
- Battery working hour: after the device
built-in battry finished the charge,it's continuous working time is not less
than 1 hour
- Safety Type:II device, BF
Type
Accessories
- Sell in standard
A user manual
A power wire
A data line
An oximeter probe
Physical Identity
Dimension:269(L)×222(W)×79(H)mm
Weight: About 1Kg