It is very smart charger which can auto-switching output.
It can charge any 2.4-14.4V Ni-MH/Ni-CD battery pack which capacity is more than 1000mAh.
The charger will cut off automatically if battery is fully charged.
MCU control the whole charge process and guarantee the battery pack get fully charge, avoid the battery pack over-charge.
LEDs indicate the charge status,red and green led flash for 2 times after plug-in ,then both off,red led on in charging, green led on after fully charge.end charge by negative delta V or peak voltage detection,red led flash in error status.
Dimension: 96.0X44.0X28.0mm.
Specification:
Input:100-240Vac
Output:2.4-14.4Vdc according to the battery pack
Charging current: 500 mA
Protection:- Zero voltage battery protection.
Short circuit protection.
Battery pack reverse connect protection.
Including: One set of Clip adapter with female tamiya connector included for charging any battery packs. One connctor adpator from standard Female Tamiya to Male Mini. Tamiya for charging RC battery packs. (WARNING! you need a special cable for the Airsoft battery charging, please contact us for that cable, otherwise you will damage the Airsoft battery)
Warning:
Charge 2-12 serials 1.2V Ni-MH/Ni-CD battery pack which capacity is more than 1000mAh only.
Don't remove the cover avoid electric shock.
Dry location use only.
Indoor use only.