Features:
Brand new and high quality
This microphone does not need to be equipped with an audio head, only the Pocket 2 universal base can be used
Lightweight and portable, you can directly link the microphone to the Pocket 2 Do-It-All Handle gimbal camera device
Small and light, easy to carry
Short microphone:
The windproof sponge cover can reduce the influence of wind and outdoor noise, making the recording clearer
Long microphone:
Clip on microphone for increasing recording distance
With wide frequency response, and high-definition sound resolution
The built-in clip can be easily fixed on the collar, convenient and practical
Condenser microphone:
The hot shoe interface and 1/4 screw hole are reserved at the bottom of the shock-absorbing bracket
The windproof hair cover can reduce the influence of wind and outdoor noise, making the recording clearer
Compatible with Pocket 2 all-round base camera, mobile phone, computer, SLR camera and other photography accessories.
Camera microphone:
The cold shoe interface and 1/4 screw hole are reserved at the bottom of the microphone
The windproof sponge cover can reduce the influence of wind and outdoor noise, making the recording clearer
3.5mm microphone:
The windproof hair cover can reduce the influence of wind and outdoor noise, making the recording clearer
Specification:
Short microphone:
Material: Metal + plastic
Applicable models: for DJI Pocket 2
Color: Black
Net weight: 6.2g
Product size: 9.4*2*2cm
Sensitivity: -43±1DB
Pickup method: unidirectional
Output impedance: <2.2KΩ
Working voltage: 1.5V
Cord length: 9.4cm
Output connection: standard 3.5 headphone plug output
Long microphone:
Material: Metal + plastic
Applicable models: for DJI Pocket 2
Color: Black
Net weight: 18.4g
Product size: 165cm
Condenser microphone:
Material: Aluminum alloy + plastic
Applicable models: for DJI Pocket 2
Color: Black
Net weight: 96.6g
Sensor: Condenser microphone
Polar mode: cardioid towards the microphone
Frequency response n: 35-18KHz
Sensitivity: -42dB +/-1db
Noise ratio: 76 decibels
Connector type: 3.5mm gold-plated interface
Camera microphone:
Material: Plastic,
Applicable models: for DJI Pocket 2
Color: Black
Net weight: 59.6g
Monomer: Electrostatic condenser capsule
Channel: Mono
Frequency response: 50Hz-16kHz
Sensitivity enhancement: +20dB±2dB
Equivalent noise level: 24dBA
Directivity: Super cardioid
Output impedance: 200Ω±30% (at 1kHz)
Maximum sound pressure level: 130dB (THD≤1.5%at 1KHz)
Sensitivity: -45dB±3dB (0dB=1V/Pa at 1kHz)
Operating voltage: AAA1.5V alkaline battery, power consumption ≤5mA (typical value)
Battery life: 70-80 hours of continuous use with new batteries
3.5mm microphone:
Material: plastic
Applicable models: for DJI Pocket 2
Color: Black
Net weight: 53.3g
Product size: 9*5.7*3cm
Access method: 3.5mm microphone jack, headphone plug access end inserted
Power supply mode: external power supply
Frequency response: 100-16000Hz
Sensitivity: -42±3dB RL=680Ω Vs1.5 (1KHz 0dB=1V/Pa)
Output impedance: 1-2.2KΩ
Current consumption; Max.0.5mA
Voltage: 1V-10V
Maximum sound pressure: 110dB S.P.L
Sensitivity reduction: 2.0V-1.5V sensitivity change is less than 3dB
Packing includes:
1 x Short Microphone
OR
1 x Long Microphone
OR
1 x Condenser Microphone Set
OR
1 x Camera Microphone Set
OR
1 x 3.5mm Microphone
Note:
Does not include Gimbal camera and other accessories,
Transition: 1cm=10mm=0.39inch,
Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering,
Due to the difference between different monitors, the picture may not reflect the actual color of the item,please make sure you do not mind before ordering, Thank you.
