 |
Specification:
Taillight Battery：18650 3.7V 2000mAh lithium battery (included) Waterproof: IP54
Alarm/Horn Noise Level: 110dB
standby time：4~8 months Bike Alarm Taillight Charging Port：Standard USB-C 5V Remote Control Battery：CR2032 button standby time：3~5 years (30 times per day) Rechargeability: Taillight battery only (USB Type-C rechargeable)
Tail Light Battery Life: Up to 70 hours (on fast flash mode)
Tail Light Battery Life: Up to 30 hours (on steady mode)
Working Frequency：433.92MHz Wireless Range：30~60m Working Environment Temperature：-40 ~+60℃ Working Environment Humidity：<80% Storage Temperature：-40 ~ +70℃ Notice!!! Please full in charging before the first usage, otherwise the remote will not work well!!! |
Package Content:
1x Bike Taillight 1x IR Remote Controller 1x Tail Light Holder 1x Mounting Bracket 1x Charge Cable |
Bike Turn Signals
|
|
|
|
|
Bike Brake Light
Once you brake the tail light will auto highlight for 2s to alert other drivers behind you. NOTE: only on Slow
|
Left Turn Signals Control left turn via wireless remote control Turn lights that flow like a car and emit "IDIDA" sound Press the button again to close |
Right Turn Signals Control right turn by wireless remote control Turn lights that flow like a car and emit "IDIDA" sound Press the button again to close |
Emergency Light Mode In emergency light mode, the light flashes quickly to remind vehicles behind Important safety reminder for temporary parking |
 
|
|||
|
【
Anti-theft Alarm-Anti-theft】Tail light can be used as a bike alarm. 7 level adjustable sensitivity from gently touch to push or beatif the alarm taillight detected vibration, it will sound a warning for 2 seconds; if it detected vibration again within 2-12 seconds, the alarm taillight will sound for 30 seconds to
scare off the thief (multiple sounds loop). The Remote control also can be used as a bike electric horn 【 BIKE HORN 】 With electric bike horn function, makes 110 decibel loud horn sound when press remote to let cars/ pedestrians/drivers know you're coming. 3 horn sounds for your choice |
|||
|
|||
|
【
WIRELESS REMOTE CONTROLR】
Remote control the bike tail light to send signals in different modes by the 5 easy to use buttons on the wireless controller. Remote control on handlebar, easy for cyclist to control during riding. Suitable for Mountain, MTB and Road Bicycles. |
|||
  |
|||
|
【
SMART AUTO ON/OFF 】
On Slow Flashing & Breathing modes, tail light automatically turns off after 30 seconds of inactivity in dark environments, and turns on when motion is detected. In bright environments it automatically turns off to save power. If you need the tail light in day time, you can select Fast Blinking\Steady Light |
 |
|
 |
|
【
ULTRA-BRIGHT &6 MODES】
Yellow Flowing Light: Turn Signal Light
Yellow Flashing Light: Emergency Light Red Light: Slow Flashing / Breathing / Blinking / Steady Light 【
Super bright】
31 high-end LED lights, up to 160 lumens of powerful flashes alert motorists at night and during the day, that enhance your visibility and safety.
|
【
USB Rechargeable 】
Built-in a 2000mAh rechargeable battery, at 7h full charge the taillight alarm can work up to 70 hours. The remote controller clamps easily to a 0.78-0.94 inch handlebar and is equipped with a CR2032 replaceable coin cell battery.
|
【IP54 WATERPROOF & DUST-PROOF】
IP54 Waterproof level make this bike turning light can be used in small to moderate rain in the temperature of in -4-140°F --The production adopts high-quality PC + anti-UV material, waterproof and dust-proof, high/low temperature resistance, not afraid of wind and rain/severe cold/ scorching heat.
|
【 Installation Instructions】
Installation of the bike alarm taillight
1. Place the silicone ring on the suitable location of seat post;
2. Put the taillight bracket into the silicone ring, align the contours on the silicone ring, then fix it with screw;
3. Insert the bike alarm taillight into the taillight bracket. Done.
Installation of the remote control
1. Place the silicone ring on the suitable location of handle bar;
2. Put the remote bracket around the silicone ring, align the contours on the silicone ring, then fix it with screw;
3. Press down and turn the remote counter-clockwise until it locks into place.
Compatible bicycles:
Mountain bike / Child bicycle /Road bike / Bicycle commuting / Ladies bike / Ordinary bicycle / Electric bike
Notice!!! Please full in charging before the first usage, otherwise the remote will not work well!!!
On Nov-12-21 at 17:26:12 PST, seller added the following information:
On Nov-22-21 at 12:15:12 PST, seller added the following information: