METRIC COPPER WASHERS

M5 M6 M8 M10 M12 M14 M16 M18 M20 M22


Question:
Is washer size measured on ID or OD?
Answer :
Washer size refers to its nominal hole size (ID) and is based on screw size. Its outside diameter (OD) is always larger.

Suitable for the following applications:

Banjo Bolt, Turbo Oil Feed, Fuel Pump, Fuel Lines, Brake & Clutch Pipes, Brake Lines, Oil Sump Bungs / Drain Plugs

Different Sizes and Quantities Available - Simply Pick From the dropdown list

Sizes Available:

M5 Metric ID 5.0mm OD 9.0mm Thickness 1.0mm
M6 Metric ID 6.0mm OD 10mm Thickness 1.0mm
M6.5 Metric ID 6.5mm (Approx 1/4") X 9.5mm (Approx 3/8") X 1.0mm
M8 Metric ID 8.0mm OD 12.0mm Thickness 1.0mm
M10 Metric ID 10.2mm OD16mm Thickness 1.5mm
M12 Metric ID 12.2mm OD18mm Thickness 1.5mm
M13 Metric ID 13mm (Approx 1/2" Actual 12.7mm) X 18mm X 1.5mm
M14 Metric ID 14.2mm OD 20mm Thickness 1.5mm
M16 Metric ID 16.2mm OD 22mm Thickness 1.5mm
M18 Metric ID 18MM OD 24MM Thickness 1.5mm

M18 Metric ID 18MM OD 22mm Thickness 1.5mm

M20 Metric ID 20mm OD 26MM Thickness 1.5mm
M22 Metric ID 22mm OD 28mm Thickness 1.5mm

REF - ID - Inside Diameter - OD - Outside Diameter


ALL SIZES ARE GIVEN ARE ACCURATE BUT APPROX - These washers are STAMP pressed out of 1mm OR 1.5mm copper sheet

INFORMATION

Annealed Copper Washers:

Annealed or softened copper washers are ideal as replacements for drain plug washers in a wide variety of applications, they are well suited to use in outdoor applications where they may be exposed to the weather. They can be used in pneumatic fittings and low pressure hydraulic systems
Tolerances: Thickness tolerance is approximately +- 0.1mm, The bore and Outside Diameter tolerance is approximately +- 0.3mm, This is not a precision component.


Benefits:

Cost effective replacement, ready annealed.

NOTE -A pack of two contains "TWO Individual washers" - the pics of the washers in the listing are for sizes! - You will not be getting TWO Bags full for £2.70!! - It is always better to buy in bulk - i.e - A Pack of 10 washers contains / comprises "10 individual washers" - It is cheaper to buy one pack of 10 individual items THAN buy 5 packs of "TWO individual items"

Washers are not mixed sizes - If you tick the M8 sized washer and then check the QTY 5 - you will receive Five (QTY) M8 - 8mm ID Copper Washers NOT Mixed sizes

Oh Did I not mention - Washers are not mixed sizes!!



Hi Guys / Gals - If you do choose the "Next Day Delivery Service" - Please as a common courtesy - Send Us A Message - Thanks!
If you don't send us a message - We could miss this!!