Power supply with conventional power bank ..
AA battery eliminator / buck converter for Sennheiser G2, G3, G4, EK100, EK300,EK2000
(Sennheiser DC2 replacement part)
This product is particularly interesting for location sound mixers or audio engineers who use Sennheiser radio links (e.g. EK100, EK, 300, G2, G3, G4, EW 100 series), who normally need two AA batteries and have no external DC input.
The converter is a USB power adapter and a battery eliminator that supplies up to 2 radio receivers simultaneously with a standard USB power bank.
Simply plug the battery adapter kit into the battery compartment of each receiver / transmitter and connect the controller to your rechargeable 5-volt USB power bank.
AA battery eliminator / buck converter for Sennheiser G2, G3, G4, EK100, EK300,EK2000
(Sennheiser DC2 replacement part)
This product is particularly interesting for location sound mixers or audio engineers who use Sennheiser radio links (e.g. EK100, EK, 300, G2, G3, G4, EW 100 series), who normally need two AA batteries and have no external DC input.
The converter is a USB power adapter and a battery eliminator that supplies up to 2 radio receivers simultaneously with a standard USB power bank.
Simply plug the battery adapter kit into the battery compartment of each receiver / transmitter and connect the controller to your rechargeable 5-volt USB power bank.
With a single action, you can switch all your radio links on and off at the same time.
(a 10,000mAh Powerbank works about 50 hours (..yes ..fifty hours) in NonStop operation!!)
The converter is small, simple, light and the cable even fits under the closed lid!
(a 10,000mAh Powerbank works about 50 hours (..yes ..fifty hours) in NonStop operation!!)
The converter is small, simple, light and the cable even fits under the closed lid!
(the offer refers to one USB adapter ONLY the receiver displayed in the pictures is not part of the deal)
TECHNICAL SPECIFICATIONS:
Battery eliminator for 2AA (3 volts) above devices
Input: 5 VDC via USB "A" Length of the input cable: 400 mm
Output: 1 x 3.0 VDC regulated
Battery eliminator for 2AA (3 volts) above devices
Input: 5 VDC via USB "A" Length of the input cable: 400 mm
Output: 1 x 3.0 VDC regulated
