FS-200 8" Heat Sealing Hand Impulse Sealer Machine Poly Free Element 300W New

   

Introductions:
To well protect fresh food from going mouldy or damp, you need a professional sealing machine. We have this FS-200 300W Portable Manual Sealing Machine recommended here. It is a powerful device, with high-strength material and easy operation. Made of iron material, it is too wear-resistant to break easily. Superior imported mould layer supports digital grain for printing date while sealing the package. And it is uneasy to deform. Pure manual operation, it is really a practical device!

Features:
1. New and in a good condition
2. Top-grade iron material with delicate workmanship, durable to use
3. Uneasy to deform or break
4. Support date printing with the built-in mould layer
5. Used for sealing package so as to keep food from deterioration

Specifications:
1. Color: Blue
2. Model: FS-200
3. Power: 300W
4. Weight: 62.78oz / 1780g
5. Dimensions: (12.4 x 3.34 x 3.34)" / (31.5 x 8.5 x 8.5)cm (L x W x H)
6. Voltage: 110V
7. Material: Iron
8. Plug: US Standard
9. Suitable for: Plastic Bags,Bubble Bags,EPE Bags,Aluminum Foil Bags,Kraft Paper Bags,Tea Bags,ect

 


Package Includes:
1 x Manual Sealing Machine
How  to  Use：

1.  No  power  switch  required  (auto-control),  link  the  AC  power  cord  with  socket,  adjust  heating  time  just  according  to  the  thickness  of  sealing-in  material;  put  the  plastic  bag  on  the  sealing-in  surface  and  press  the  handle,  the  circuit  will  automatically  control  heating  time.  The  power  will  automatically  shut  down  when  the  indicator  light  goes  out.  After  1-2  seconds,  release  the  handle  to  finish  sealing.

2.  Any  damage  occurs  during  sealing  is  because  of  over-long  heating  time,  please  spin  the  rotary  knob  anticlockwise  to  shorten  heating  time.
3.  Too-short  heating  time  will  cause  unstable  sealing.  Please  spin  the  rotary  knob  clockwise  to  lengthen  heating  time
4.  If  the  plastic  bag  sticks  to  rubber  pressing  board,  it  means  the  cooling  time  is  insufficient.  You  must  lengthen  the  cooling  time  after  indicator  light  extinguishment.  Slightly  late  to  release  the  handle
5.  Remain  the  heating  time  unchanged  after  adjustment,  and  no  need  to  adjust  it  during  continuous  service.
6.  Keep  AC  power  cord  always  inserting  on  the  socket,  no  electricity  consumption  when  there  is  no  sealing.
 
Warm  Prompt：
    1.  Always  keep  the  sealing  surface  clean,  avoid  any  residue  oxidation  on  the  surface  to  reduce  ribbon  heater  and  lifespan  of  heat-resisting  fabric.
    2.  Don't  use  wet  cloth  to  scrub  sealing  surface.
    3.  Worn-out  liner  under  ribbon  heater  will  cause  short  circuit  and  finally  damage  the  ribbon  heater.  So,  it  is  a  must  to  check  up  liner  condition  every  time  you  change  ribbon  heater.  Replace  a  new  one  once  there  is  any  damage.
    4.  When  you  have  to  change  the  ribbon  heater,  you  must  choose  a  ribbon  heater  with  the  same  specification  to  original  one.
 
Troubleshooting：
The  following  listed  cases  are  excluded  to  quality  issue
1.  Repeated  usage  of  heater  strip  breaks  due  to  autoxidation,  which  leads  to  electricity  failure,  suggest  to  replace  a  new  one  (oxidation  under  high-temperature  is  normal  phenomenon) 
2.  Inner  coil  burnout  or  damage  caused  by  overload  continuous  usage  or  wrong  operation
3.  Any  man-made  damage  leads  to  non-operation  cases
Note:  suggest  to  keep  heating  gear  between  3-5  mode,  it  helps  to  extend  the  lifespan  of  machine;  long-term  working  on  high-gear  will  easily  lead  to  burn-up  of  inner  parts.  If  the  inner  coil  is  burnt  out,  the  machine  will  be  disposed  as  scrap.