【Fast heating thermostatic design】: Using ceramic induction technology, internal heating, soldering iron is high heating efficiency and low energy consumption. Fast heating up within 30 seconds, say goodbye to the long preheating time. Soldering iron uses a constant temperature chip, automatically stops heating to a certain temperature. After the temperature has dropped, the chip is heated again after induction.

【Excellent Soldering Iron with LCD Screen】: With temperature control buttons and LCD temperature display, you can adjust the temperature from 200℃ to 450℃, read the temperature clearly, so a circuit board is less likely to overheat.

【Soldering Iron with ON/OFF Switch】: No soldering station required, just plug and use. With the on/off switch, it is convenient to switch off the iron when you need a break, without having to turn off the device by constantly unplugging the iron from the socket. At the same time, long hours of work can be avoided, energy can be saved and safe welding can be guaranteed.


Advantage:
1. Fast heating: 80W soldering iron heats up to the selected temperature within 30 seconds, with internal heated ceramic technology and high temperature stability, it can protect your welding equipment.

2. Digital Temperature Display: The LCD screen makes it easy to see what temperature the iron is at and when it's ready the numbers will stop flashing.

3. Adjustable temperature settings: You can use TEMP+/- buttons to set your desired temperature (temperature range: 200~450℃) and keep this setting while soldering.

4. ON/OFF button: It is convenient to turn off the iron when you need a break, no more turning off the power by unplugging the iron all the time.

5. Fast Cooling: With heat dissipation holes in steel tube and bakelite, the soldering iron cools down quickly in a few minutes.


Specification:
Working Voltage: 220V
Power: 80W
Temperature range: 200℃ - 450℃
ON/OFF switch: yes

Delivery content:
Soldering iron x 1
Solder wire x 1
Soldering iron stand x 1
Flux paste x 1



Warm tips

1. Please be very careful when using the tools, and better keep them in a place where children cannot reach.
2.Please switch to 200℃ model when not using the pencil iron. And please don't let the soldering iron work under high temperature.
3. Do not apply too much pressure when welding. As long as the iron tip is in full contact with the solder joint, heat can be transferred.
4. To avoid oxidation, please clean the soldering iron tip and "tin" all sides of the tip with a layer of solder after use. If there is black oxide on the iron tip, please clean it with a WET sponge first.