eBay

Please

Please beware of cheap stickers that were not intended for these screens as they cannot be sure to 100% hold it in place!

VHB (Very High Bond) display tape repair kit for all the 21.5" iMac ranges.

This kit includes the 6 part tape kit and blades and prying tool (Sold separately) needed to remove the front glass from the iMac and fit the display to the rear housing unit again.

Please Note: Removing and refitting the display on this range of iMac is not recommended without previous training or knowledge, as it is a difficult job to undertake. VHB strips are a very thin layer of foam between two self-adhesive plastic strips. A special tool with disposable cutting disks is used to cut the foam layer when removing the display and therefore this kit will be needed each time the display assembly is removed and refitted.

Please also note: For iMac 4K models: strip completely covers the microphone and the holes in front of it which can deaden any sound picked up. Knowing this, the solution is simple. Make sure the microphone works properly before using any adhesive. Then, apply the adhesive strips, but when laying down the bottom strip, cut away the portion covering the microphone (and a little bit more from each side to be safe).

Condition: Brand New

Part Number(s) : 076-1437, 076-1416, 076-1422, 946-4469, 946-4471, 946-4472, 946-4468, 946-4470, 946-5035, 946-5036

The glass removal kit comes in two parts

1. The handle is made of acceptably durable plastic and easily accommodates the cutting wheel while providing plenty of grips. In

addition, the end of the handle features a thin prying and slicing blade to ensure you loosen all the adhesive.

2. The cutting wheel is specifically designed to slip in the hair-thin gap between the display and the aluminium frame, then

easily cut the adhesive strip holding the two pieces together.

Features:

100% brand new and high quality.
High-quality material makes it more durable
Easier to disassemble the electronic part accessories
Commonly used in touch screen laptops, mobiles and tablets disassembling.
Special rolling-wheel design for better use in an opening.
The end of the tool with anti-slip design makes it easier for disassembling

A1418 Compatibility:

YEAR

INTRO DATE

SIZE

ORDER No.

MODEL No.

EMC

MODEL ID

CPU

Late 2012	20121023	21.5"	MD093LL/A	A1418	(EMC 2544)	For iMac13,1	2.7 GHz Core i5 (I5-3335S)
Late 2012	20121023	21.5"	MD094LL/A	A1418	(EMC 2544)	For iMac13,1	2.9 GHz Core i5 (I5-3470S)
Late 2012	20121023	21.5"	BTO/CTO	A1418	(EMC 2544)	For iMac13,1	3.1 GHz Core i7 (I7-3770S)
Early 2013	20130305	21.5"	ME699LL/A	A1418	(EMC 2545)	For iMac13,1	3.3 GHz Core i3 (I3-3225)
Late 2013	20130924	21.5"	ME086LL/A	A1418	(EMC 2638)	For iMac14,1	2.7 GHz Core i5 (I5-4570R)
Late 2013	20130924	21.5"	ME087LL/A	A1418	(EMC 2742)	For iMac14,3	2.9 GHz Core i5 (I5-4570S)
Late 2013	20130924	21.5"	BTO/CTO	A1418	(EMC 2742)	For iMac14,3	3.1 GHz Core i7 (I7-4770S)
Mid 2014	20140618	21.5"	MF883LL/A	A1418	(EMC 2805)	For iMac14,4	1.4 GHz Core i5 (I5-4260U)
Late 2015	20151013	21.5"	MK142LL/A	A1418	(EMC 2889)	For iMac16,1	1.6 GHz Core i5 (I5-5250U)
Late 2015	20151013	21.5"	MK442LL/A	A1418	(EMC 2889)	For iMac16,2	2.8 GHz Core i5 (I5-5575R)
Late 2015	20151013	21.5"	MK452LL/A	A1418	(EMC 2833)	For iMac16,2	3.1 GHz Core i5 (I5-5675R)
Late 2015	20151013	21.5"	BTO/CTO	A1418	(EMC 2833)	For iMac16,2	3.3 GHz Core i7 (I7-5775R)
Mid 2017	20170605	21.5"	MNDY2LL/A	A1418	(EMC 3069)	For iMac18,2	3.0 GHz Core i5 (I5-7400)
Mid 2017	20170605	21.5"	MNE02LL/A	A1418	(EMC 3069)	For iMac18,2	3.4 GHz Core i5 (I5-7500)
Mid 2017	20170605	21.5"	BTO/CTO	A1418	(EMC 3069)	For iMac18,2	3.6 GHz Core i7 (I7-7700)

Removing the display on the A1418, A2116 iMac requires a specialized iMac opening tool. You can Watch or read online instructions before instaling.

Lifetime warranty on the adhesive stickers following correct installation and procedure