DIY Headlight Restoration Kit Cleaner With UV Protection Car Light Polisher Kit
Instructions:
- Step 1: Prepare
Clean the lens with water, tape the surrounding of lens to avoid scratches.
- Step 2: Sanding (800P → 1200P → 2000P)
(1) Use drill or manual and 800 grinding sandpaper for 2-3 minutes. Clean light with water continuously;
(2) Use drill or manual and 1200 grinding sandpaper for 2-3 minutes. Clean light with water continuously;
(3) Use drill or manual and 2000 grinding pad. Clean light with water continuously. - Note: lens should be damp throughout this process.
- Step 3: use the orange sponge and apply the Polish Paste (Step 2). Grind the paste for about 3-5 minutes until there is no trace of burnish.
- Step 4: apply Protect Liquid (Step 3) with a white sponge and avoid sunlight, without using drill.
- Note: Please must avoid any sunlight when apply the product liquid on headlight ( very important ).
After UV Protect Liquid, keep the lens dry. Do not wash the car for 24 hours.
Precautions: - Avoid eye contact.
- Don’t get on skin or clothing.
- Use only with adequate ventilation.
- Do not swallow.
- Wash thoroughly after handling.
Specification:
Package Size: 8.11 * 4.17 * 2.09 inches
Package Weight: 6.77 ounce
Package Include:
2 * P800 Sanding Discs
2 * P1200 Sanding Discs
2 * P2000 Sanding Discs
2 * 40gm Polish Paste
2 * 3.0ml UV Protective Liquid
1 * Mask Tape (300x2cm)
1 * Sponge Disc Orange
1 * Sponge Disc White
1 * Backer Pad M10 Thread
1 * Adapter
1 * English user manual