ATTENTION: The price shown includes Greek VAT 24% and is applicable to all individuals in EU countries only. If you are from any other country including USA, Canada, Australia etc. please use the "make offer" button and divide the price by 1,24.We will first accept this offer to let you proceed with the check-out and payment. If you are a business registered in EU with a valid VAT number again, you can use the same button so to pay without VAT. We will send you a zero VAT tax invoice.

RF HIGH-POWER RELAY (BUILT & TESTED PCB MODULE)

The Module includes a high-quality built & tested ENIG FR4 PCB (27.5 x 39 mm) that comes with 3 female SMA connectors soldered in place.

50 Ohm contact
0.25 dB max attenuation at 3 GHZ
40 dB min isolation
More than 40W CW power handling

I am sorry I didn't know of the AXICOM HF353 relay before. It is designed with a 50-Ohm contact and works very nicely up to 3 GHZ and more!

It can handle 40-50 W of RF power at 3 GHZ! It's insertion loss is very low at 0.25 dB max while the isolation of the non-selected port is >40 dB.

I quickly prepared a small PCB with 2-oz copper thickness and 50 Ohm transmission lines and when built I could happily verify its performance.

And because I thought many experimenters will find this useful I made it available to order.

The relay's coil is specified for 5 VDC operation but the PCB module is designed for powering the relay with a MOSFET switch and is equipped with resistors for 13.8 VDC system voltage.

This can be changed by altering the values of the resistors R1 and R2. Extensive filtering is used and balanced snubbing to reduce voltage transients to any system this module will connect with.

The MOSFET gate will accept a 3.3V or 5V TTL High signal to activate the relay. A green LED will light and altogether will consume around 35 mA.

The eBay item will be shipped with Registered priority air mail with tracking info

or with FedEx/DHL, please choose while checking-out.

Check out my other items! I always combine shipping.