Smooth Swing Base Lit Saber USERGUIDE
To wake the lightsaber
Hold down power button for 1 seconds. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode.
Awake mode operation: Pressing the power button will turn the blade on and activate sounds and effects.
When the blade is lit, the power button operates thusly:
- Tap - blaster deflection - Hold 0.5 second, button LED flash 1 time, then release - saber lock-up
Change colors
-Hold 1 seconds, button LED flash 2 times, then release to cycle rainbow blade colors. Once a desired color is reached, tap it to set the color.
-Hold 1.5 seconds, button LED flash 3 times, then release to cycle solid blade colors. Once a desired color is reached, tap it to set the color.
(This function have another version: Hold 1.5 seconds, button LED flash 3 times, then release-saber force.
Two versions shipped randomly, don't accept designate version)
- Hold press button 2 seconds powers turn off the blade. Button LED flash 4 times
When the blade is off, the power button operates thusly:
Volume adjustment
-Holding the power button down for 0.5 seconds, button LED flash 1 time, while the blade is off, but still in wake mode, let go of the button will select sound volume.
Change modes
-Holding the power button down for 1 seconds, button LED flash 2 time, while the blade is off, but still in wake mode, will select a new light effects(stable, unstable, and pulse available).
Change fonts
-Holding the power button down for 1.5 seconds, button LED flash 3 time, while the blade is off, but still in wake mode, will select a new sound fonts.(9sets available).
Turn off
-Holding press button 10 seconds to make the saber sleep. If the saber sits idle for 10 minutes it will also enter deep sleep again.
Sleep mode operation:
When the saber is in deep sleep there will be no lights or sounds to keep power for long time.