Wash and Cure Max

Anycubic Wash & Cure Max - One-click Washing and Curing

Anycubic Wash & Cure Max - Sample Prints

about this item

【Larger Washing&Curing Size】ANYCUBIC Wash and Cure Max can hold up to 14.9L, surpassing the sizes of most wash and cure machines in the market. The maximum cleaning size reaches 300x165x300mm(11.8”x6.5”x11.8”), 122% larger than wash & cure plus, which is compatible with almost every consumer-grade resin 3D printer measuring 13.6” and below available on the market.
【Dual Cleaning Modes】Wash and cure max machine supports dual cleaning method. A.𝐒𝐩𝐫𝐚𝐲 𝐑𝐢𝐧𝐬𝐢𝐧𝐠. ANYCUBIC Wash & Cure Max uses mechanical jets to create a powerful jet of water that quickly delivers IPA/alcohol to the print. B.𝐈𝐦𝐦𝐞𝐫𝐬𝐢𝐨𝐧 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠. After spray washing, the wash&cure machine initiates a bottom soak to thoroughly remove the resin lying along the bottom or lodged between the intricate details of the models.
【Alcohol Usage Saving 50%】4L isopropyl alcohol is enough to clean large-sized models(10” and up), saving over 50% compared to 8.5L required by traditional wash and cure machines. Moreover, one 5-liter bucket of isopropyl alcohol can clean up to 20 models (10” in height and up), minimizing alcohol loss during a single wash(the alcohol consumption for a single wash is less than 50ml).
【360° Dimensional Curing】Featuring a 360° automatic rotating curing platform, this wash and cure station provides higher curing energy values and longer irradiation distances, enabling comprehensive and efficient curing for your 3d printing models. The convenient all-in-one flip cover design allows for easy opening and closing. The user-friendly control panel interface ensures a smooth and seamless operation experience.
【One-click Washing and Curing】Compared to traditional wash and cure machine, wash and cure max can complete washing and curing with a dual-function button. Bid farewell to time-consuming and labor-intensive post-processing. Experience streamlined model processing that saves your time and effort.

Wash and Cure 3 Plus

About this item

【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.

Tech Specs

In The Box

Comparison

Features

Anycubic Wash & Cure 3 Plus

Anycubic Wash & Cure Plus

Funcion

Wash & Cure 2-in-1

Control Method

Multi-touch buttons

Touch Button & Control Knob

Maximum Cleaning Volume
(Cleaning without platform)
(Cleaning with platform)

228*128*260mm
228*128*250mm

192*120*290mm
192*120*235mm

Maximum Curing Size

φ220*260mm

φ190*245mm

Build Volume

312*267*434mm

290*270*479mm

Weight

5.7kg

6.5kg

UV Light

14pcs 405nm+Gooseneck Light

16pcs 405nm

Time Setting

1-30mins

1-60mins

Cleaning Mode

IPA Soaking Mode

Rated Power

36W

25W

Wash and Cure 3

About this item

【Larger Size for Upgraded Capacity】Anycubic Wash & Cure 3’s maximum cleaning volume is up to 165*100*180mm³(3L), 42% larger than Wash & Cure 2.0. The total volume of the cleaning bucket has been expanded to 4L. The curing size has increased by 42%, up to 160*180 mm, to accommodate larger and more models for single post-processing session.
【Localized Strengthening, Uniform Curing】The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3’s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model.
【Dual-layer Design, IPA Saving】Anycubic wash and cure 3 machine adopts the double-layer PP material cleaning basket designed with two heights at 100mm and 165mm, to flexibly accommodate print platforms from 5.9" to 7.3". This design maximizes the efficiency of IPA usage.
【Simple Operation, Quiet and Efficient】One click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, adjustable from 1 to 30 minutes at will. Besides, a more sealed structural design and software optimization help to reduce the noise interference generated during cleaning & curing, creating a quieter and more comfortable working environment.
【Wide Compatibility】Enlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3'' and below available on the market.

Wash and Cure Plus

Technical Specifications

● Machine: Wash and Cure

● Control method: Digital tube, LED indicator, Control knob

● Rated power: 40W

● Input voltage: AC110/240V 50/60Hz

● UV lights: 405nm

● Time selection: 1-60min

● Machine size: 290mm(L)*270mm(W)*479mm(H)

● Basket washing size: 192mm(L)*120mm(W)*290mm(H)

● Hanging cleaning size: 192mm(L)*120mm(W)*235mm(H)

● Curing size: 190mm(D)*245mm(H)

● Weight: ~6.5kg

Parts List

Washing container

Tool set

Power cord

User manual

Washing basket

Reflector

Cure platform

Service card

Washing rack


3D Printer	Wash and Cure Plus	Wash and Cure 2.0	Wash and Cure 3.0	Wash and Cure 3 Plus	Wash and Cure Max
UV lights	405nm	405nm	405nm+Gooseneck Lights	405nm+Gooseneck Lights	405nm
Time selection	1-60mins	1-60mins	1-30mins	1-30mins	1-30mins
Washing size	192mm(L) 120mm(W) 290mm(H)	120mm(L) 74mm(W) 165mm(H)	165mm(L) 100mm(W) 180mm(H)	165mm(L) 100mm(W) 180mm(H)	300mm(L) 165mm(W) 300mm(H)
Curing size	190mm(D) *245mm(H)	140mm(D) *165mm(H)	165mm(D) *180mm(H)	228mm(D) *260mm(H)	--
Machine weight	6.5kg	3.7kg	2.7kg	5.7kg	13.5kg