Feature:

1. SELF LOCKING: M8‑P0 self locking standard version, input low level, the signal only needs to be triggered once, the module self locking runs all the time
2. 0.3 SECONDS TO STOP: CCW signal is encountered during CW rotation, will stop immediately after 0.3 seconds and enter CCW rotation
3. STOP IMMEDIATELY WHEN ENCOUNTERS LIMIT SIGNAL: The limit signal has priority, and will stop immediately when encounters the limit signal of the CW rotation during CW rotation
4. CW ROTATION CANNOT BE STARTED UNDER LIMIT SIGNAL: When there is a CW rotation limit signal, the CW rotation cannot be started. CCW is the same
5. SHORT CIRCUIT 0V LEVEL TO START: Valid when the positive and negative signal is low, that is, short circuit 0V level(negative power) and start
6. LIMIT SIGNAL NORMALLY OPEN: The limit signal is normally open. For example, when the SW1 switch is closed or connected to a low level, the CW rotation cannot be started

Specification:

Item Type: DC Motor Controller
Material: PCB
Working Voltage: DC 4V-40V
Rated Current: Rated 5A
Response Speed: K1 and K2 are 20ms, SW1 and SW2 are 50ms
Module Power Consumption: 0.6W(without load motor), static 0.1W
Signal Input: Low level effective, the input is the negative electrode of the optocoupler, and the voltage is lower than 2V, which means there is a signal
Action Life: More than 150,000 times

Package List:

1 x DC Motor Controller

Note:

Please use according to the parameter voltage range.