The Furman M-8Lx Merit Series power conditioner offers top-notch protection for your gear, at a price point that won't break the bank - perfect for any rack system. Place an M-8Lx in to the top slot of your rack, and you've got access to eight switched outlets on the rear panel - including wall-wart spacing - to power and protect all your equipment, up to a 15-amp load. To provide discreet illumination of your equipment on stages, in studios, and in other dark places, the M-8Lx features two slide-out, swiveling light fixtures.

You've got a rack for your effects, preamps, tuner...but you're going to plug that straight into the wall? One big spike and your rig is up in smoke. The Furman M-8Lx's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. You'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

Can't track down where that noise is coming from? Your mix sounding flat? With the M-8Lx's standard level RFI/EMI filtration, you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

FEATURES

• Noise Filtration
  • AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Surge Protection
  • Spike & surge protection ensures equipment stays safe and your power stays clean
• 9 Total Outlets
  • 8 rear panel outlets and 1 front panel outlet
• 15 Amp Rating
  • 15 amp rating, with circuit breaker
• “Protection OK” Indicator
  • Front panel indicator LED lets you know that your equipment is being protected
• Wall Wart Spacing Indicator
  • Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
• Front Panel Pull-out Lights
  • Two retractable incandescent light fixtures with dimmer control for convenient rack illumination

SPECIFICATIONS

• Maximum Output Current: 15 Amps
• Line Cords: 6 ft. captive, 14 AWG, with 3-conductor Edison Plug
• Lamps: Two 120V incandescent bulbs, 4 watts each
• Operating Voltage: 120VAC 60Hz
• Spike Protection Mode: Line to neutral
• Energy Dissipation: 150 Joules
• Peak Impulse Current: 12,000 Amps
• Maximum Continuous Operating Voltage: 130 VAC RMS
• Noise Attenuation (Transverse Mode): M-8x2: Greater than 23db, 200Khz to 10MHz
• Dimensions: 1.75" H x 19" W x 7.5" D
• Weight: 6 lbs (2.7 kg)