HSTL19120GN1B

the HAZE guitar neck is designed to be used as a replacement or as a DIY project for guitar enthusiasts. However, it's important to note that the neck specifications may have a slight variance of +/- 1 or 2mm. Therefore, it's essential to check the measurements of your guitar body and hardware to ensure a proper fit. If you are using this neck with a non-HAZE body or hardware, you may need to make slight modifications to achieve the right fit.

 

Specifications:

Neck:                                     Maple

Fretboard:                              Maple

Nut:                                       White (pre-installed)

Weight:                                 600g

Radius:                                 12in

Frets:                                     22 (Width: 2.5mm)

Truss Rod:                            2 way

Inlays & Side Marker:           Black Dot

Scale Length:                       648mm / 25.5in

Nut Width:                            3mm / 1.65in

Thickness at Head:              15.5mm / 0.610in

Thickness at Nut:                 30mm / 1.18in

Thickness at 12^th Fret:         22mm / 0.86in

Width at 12^th Fret:                52mm / 2.04in

Length of Heel:                    108mm / 4.88in (Fretboard overhang: 6mm)

Width of Heel:                      57mm /2.24in

Depth of Heel:                      28mm / 1.1in (including Fretboard)

Width of Tuner Hole:           10mm / 0.39in

Length from Nut to Heel of Fretboard: 477mm / 18.77in

Length from Nut to Heel of Neck: 471mm / 18.54in

Total Length                         665mm / 26.18in