Feature:
Output Power 4R@100W(50W+50W,)
Terminating impedance: 4Ohm - 8Ohm
THD THD<0.4%@1KHZ 100W
Frequency Range: 20HZ~20KHZ 0DB
SNR BW:20~20K,A计权:-89~-96DB
BT name Uhddadi-100
BT audio format SBC,ACC 44.1K 16BIT
BT transmission range: 40ft(12m)
Input sensitivity: 500mV RMS
Power supply: DC 24V/5A
Use and operation
INPUT Please disconnect the Bluetoo connection when using
BT use No password is needed, find the "Uhddadi-100" device name and click connect and pair to play.
Audio input attention This power amplifier has an energy-saving mute mode, please pay attention to the following use, otherwise it will cause no sound output
Use BT or RCA INPUT, and the volume input should not be too low, otherwise it will be muted after 1 minute
It is recommended that the volume of the external audio source is not less than 60%
Power-on precautions Plug the 24V adapter into the power supply, and plug the DC head into the product after the adapter light is on. Do not use other power sources for testing, which will damage the product. If the adapter light does not light, please do not connect it to this product. Damage the machine
Before use, make sure that the switch is OFF and the main volume is not at the maximum position. Connect all the cables, connect the antenna, and connect the power supply. Turn the switch to ON again. At this time, the power LED lights up. Start normal use.
This product only supports 24V DC power supply, using other power supplies may cause abnormalities
BASS OR Treble can only be fine-tuned The frequency response at the maximum right twist is the original value
This product is only suitable for passive speakers
Optional: With BT and RCA select (INPUT)
Input mode:BT and Analog
Power supply range: 24V
Power supply: 24V/5A
Package included:
1 x BT Audio Amplifier
1 x High-quality Power supply
1 x AC power cord
1 x User Manual
1 x BT Antenna
(Notice: The BT antenna is placed in package slot, please check carefully.)