DC3.6-4.8V to 50KV
Features:1. This high-voltage module is made using the Tesla coil principle2. Made of high quality materials, durable and practical3. Small size, high efficiency, fierce discharge intensity4. Pulse high and low voltage integrated type, more convenient to use5. Wide range of applications, can be used as a high voltage source for secondary school science experiments, electronic instruments, negative ion generators, scientific small productions
Specification:
Input voltage: DC3.6-4.8V
Input current: 2A-5A
High voltage type: pulse high and low voltage integrated type
Module size: 50*22*19mm
High-voltage bipolar discharge distance: 5-15mm
Correct use method:
The first step: first the module of the same color two wire end distance fixed in the (0.5 - 1) cm
The second step: the other end of the red and green two wires connected to the module needs to work on the battery, red line positive green line negative, according to the module work needs: 3.7V rechargeable lithium batteries a section or two in series
Caution
1, ordinary dry battery tested no capacity can not drive the module work.
2, the principle of the module is the input current conversion high voltage to the form of arc output, so the battery capacity determines the module output arc effect! Must be sure to power on the working time control within 10 seconds, take intermittent discharge. Beyond the easy damage! The store is not responsible!
3, within the specified range, the smaller the voltage and current you input can pull out the arc is shorter, long time use incorrect voltage pull arc easy to make the module damage.
Package List:
1x high voltage generator
DC3.6-6V to 500-1000kV
Features:1. This high-voltage module is made using the Tesla coil principle2. Made of high quality materials, durable and practical3. Small size, high efficiency, fierce discharge strength4. Peripheral circuit is simple (only need to connect the switch, the battery can be), more convenient to use5. Wide range of applications, can be used as a high school science experiments, electronic instruments, negative ion generator, high voltage source for small scientific productions
Specification:
Input voltage: DC3.6-6V
Input current: 2A-5A
High voltage type: pulse high and low voltage integrated type
Output voltage: about 50-1 million volts or so (please pay attention to safety when using)
High-voltage bipolar discharge distance: 10-15mm
Note:
High voltage module should avoid high voltage no-load energized use. (Before energizing must be adjusted to the appropriate distance from the end of the high-voltage line, high-voltage line arcing distance and the use of battery voltage and capacity is proportional. Test arc distance from short to long experiments, forbidden to exceed the longest arcing distance when energized, due to the high voltage energy can not be released, very easy to damage the module.)
To determine whether the battery capacity can drive the output of the maximum power is to measure the battery voltage when pulling the arc. If in about 6V can output the maximum power.
Small capacity lithium two series connection for 7.2V, in the pulling arc state measurement voltage has fallen to about 4V, the smaller the capacity of the lower the voltage pulling. Therefore, it is recommended to use more than 2000mA lithium battery, the best conditions with more than 4000mA power supply
List:
1 x high voltage generator
A-6-12V to 500-1000kV
B-6-12V to 500-1000kV
Features:1. Use of high-quality materials, quality assurance2. Stable performance3. Exquisite and compact appearance4. Easy to use5. Widely used in a variety of distance measurement occasions
Specification:
Input voltage: DC6-12V
Input current: 1A-3A (related to voltage)
High voltage type: pulse high and low voltage integrated type
Output voltage: about 50-1 million volts or so (please pay attention to safety when using)
High-voltage bipolar discharge distance: 5-15mm
Output high voltage line length: about 100mm
Input power line length: about 100mm (red line is the positive pole)
Dimension: 88*26mm
A version can not work continuously, B version can work continuously for 1 minute but is strictly prohibited beyond the working time
About the power supply: can use 3.7V lithium batteries two in series, such as 18650 batteries, idle cell phone batteries (to remove the protection plate, the recommended capacity of 2000mAh or more) or NiCd / NiMH battery pack, 6V lead-acid batteries, etc.
This module is the finished module of high voltage inverter transformer/booster for science small production, after inputting DC6-12V voltage at the input side, you can get about 10,000 volts DC high voltage (about 5-1.5 cm arc) at the output side, which can be used as a high voltage source for middle school science experiments, electronic instruments, negative ion generators and science small production.
Precautions:
High-voltage module should avoid high-voltage no-load energized use. (Before energizing must be adjusted to the appropriate distance from the end of the high-voltage line, high-voltage line arc distance and the use of battery voltage and capacity is proportional. Test arc distance from short to long experiments, forbidden to exceed the longest arcing distance when energized, due to high voltage energy can not be released, very easy to damage the module.)
Package List:
1x high voltage generator