Technical Specifications:
Input voltage: AC 110V-220V
Output voltage: 0-110V adjustable(not work when output below 5V)
Adjustable voltage range: 0 -110V
Max Power: 4000w
Load Power: 2000W
Nominal Current: 9a
Max. Current: 18a
Dimension: Approx11.5 * 10 * 6cm/4.53"*3.94" *2.36"
Suit for: Angle Grinder, Electric Screwdriver, Electric Drill
Product features: zero lag, zero delay, with peak voltage absorption circuit to effectively protect high-power thyristor, anti-surge, anti-spike, RC absorption multiple protection
SCR model: STMicroelectronics SCR, BTA41-600B/800B
Executive standard: GB14536.1-2008
Note:
-
the Measurement of the Output Voltage in the Empty State Is a Virtual Voltage. It Must Be Connected to a Load of 20w or More to Measure the Correct Output Voltage.
-
Input Alternating Current, the Output Is Also Alternating Current, Not Direct Current.
-
the Above Mentioned 4000 W Refer to the Maximum Power When Working Under Ohmic Load. the Inductive Load Is 1/3 of the Ohmic Load. the Ohmic Load Relates to the Tungsten Light Bulb, the Heating Wire, Etc. the Inductive Load Relates to the Series Exciter Motor. There Are Electronic Products for Printed Circuit Boards That Are Used with Caution.
-
This Product Is a Metal Housing and Must Be Securely Earthed.Note: The voltage regulation range of this product is adjusted based on the original input voltage. For example, if the input voltage is 110V, the output can only be 0-110V. If the input voltage is 220V, the output can only be 0-220V.