110V 80W Auto Welding Electric Soldering Iron Temperature Gun Solder Tool USA
1x Gun + 1x Wire - 60W
Feature:
*Alloy tip, fast heating, durable
*One-hand lead-free tip operation,to view the tin situation at any time, not easy to make mistakes
*High-quality ABS plastic shell, comfortable and anti-slip handle, long-term operation will not fatigue
*Tin wire scaffold can be disassembled, easy to use
*Simple operation, novel design
*Scientific design, not easy to stuck
*Power cord is soft, can be bent, more durable
*With a suction tin device, more convenient
*Good solderability, insulation resistance and non-corrosive.
*Convenient to solder small items together.
*Effective rosin flux core cleans the surface.
*Heat resistant Teflon pipe fitted with 0. 8 - 1.2mm solder wire
*To ensure a better soldering joint.
*It is widely used in electrical and electronics , solder parts like circuit board , electronics devices and others
Usage Method:
1.Press down the tin inlet,insert the solder wire from the tin inlet,and buckle the plate,machine until the tin wire is sent to the tin guide pipe.
2.Connect the soldering gun to the power supply,turn on the power switch and preheat.
3.When the soldering gun is heated to enough heat,the welding machine can be operated by pulling the trigger.
4.When the tin wire is withdrawn,the tin inlet is pressed,and the tin wire is drawn at the same time.
5.To replace the heating core,first remove the window,remove the connecting wire of the heating core,and then remove the soldering nozzle,the heating core can be replaced.
Specification :
Power: 60W
Input voltage: 110V
Warm-up time: 2 - 4 minutes
Working Temperature: 480 - 600 degrees Celsius
Melting point : FLUX 2%.
Material : Metal+ABS
Color:Green
Solder wire diameter : 1.0 mm
Power cord length:1.3m
Solder wire size : 2.17in * 1.1in /5.5cm * 2.8cm
Electric Soldering Iron Gun: 8inch*6.8inch*1 inch/20.5*17.5*2.5cm
*Alloy tip, fast heating, durable
*One-hand lead-free tip operation,to view the tin situation at any time, not easy to make mistakes
*High-quality ABS plastic shell, comfortable and anti-slip handle, long-term operation will not fatigue
*Tin wire scaffold can be disassembled, easy to use
*Simple operation, novel design
*Scientific design, not easy to stuck
*Power cord is soft, can be bent, more durable
*With a suction tin device, more convenient
*Good solderability, insulation resistance and non-corrosive.
*Convenient to solder small items together.
*Effective rosin flux core cleans the surface.
*Heat resistant Teflon pipe fitted with 0. 8 - 1.2mm solder wire
*To ensure a better soldering joint.
*It is widely used in electrical and electronics , solder parts like circuit board , electronics devices and others
Usage Method:
1.Press down the tin inlet,insert the solder wire from the tin inlet,and buckle the plate,machine until the tin wire is sent to the tin guide pipe.
2.Connect the soldering gun to the power supply,turn on the power switch and preheat.
3.When the soldering gun is heated to enough heat,the welding machine can be operated by pulling the trigger.
4.When the tin wire is withdrawn,the tin inlet is pressed,and the tin wire is drawn at the same time.
5.To replace the heating core,first remove the window,remove the connecting wire of the heating core,and then remove the soldering nozzle,the heating core can be replaced.
Specification :
Power: 60W
Input voltage: 110V
Warm-up time: 2 - 4 minutes
Working Temperature: 480 - 600 degrees Celsius
Melting point : FLUX 2%.
Material : Metal+ABS
Color:Green
Solder wire diameter : 1.0 mm
Power cord length:1.3m
Solder wire size : 2.17in * 1.1in /5.5cm * 2.8cm
Electric Soldering Iron Gun: 8inch*6.8inch*1 inch/20.5*17.5*2.5cm
80W-7PCS(1x Gun+1x Pump+1x Tin Wire+2x Tweezers+1x Solder wire holder+1x screwdriver)
Usage method:
1.Press down the tin inlet,insert the solder wire from the tin inlet,and buckle the plate,machine until the tin wire is sent to the tin guide pipe.
2.Connect the solder gun to the power supply ,turn on the power switch and preheat.
3.When the soldering gun is heated to enough heat,the welding machine can be operated by pulling the trigger.
4.When the tin wire is withdrawn, the tin inlet is pressed,and the tin wire is drawn at the same time.
5.To replace the heating core,first remove the window,remove the connecting wire of the heating core, and then remove the soldering nozzle ,the heating core can be replaced.
Specification:
Material: Plastic
Working temperature: 300-600℃
Product power: 80W
Applicable tin wire: 0.6~1.6mm
Warm-up time: 30 seconds
Operating voltage: AC110~220V
Size: Gun:19*15cm
Pump:20.5cm
Tweezers#1:14.5cm #2:12.5cm
ring holder:3.5*4.2cm
Screwdriver:13cm
Weight: Tin Wire Roll:50g
Product:425g/14.99oz/0.94lb
1.Press down the tin inlet,insert the solder wire from the tin inlet,and buckle the plate,machine until the tin wire is sent to the tin guide pipe.
2.Connect the solder gun to the power supply ,turn on the power switch and preheat.
3.When the soldering gun is heated to enough heat,the welding machine can be operated by pulling the trigger.
4.When the tin wire is withdrawn, the tin inlet is pressed,and the tin wire is drawn at the same time.
5.To replace the heating core,first remove the window,remove the connecting wire of the heating core, and then remove the soldering nozzle ,the heating core can be replaced.
Specification:
Material: Plastic
Working temperature: 300-600℃
Product power: 80W
Applicable tin wire: 0.6~1.6mm
Warm-up time: 30 seconds
Operating voltage: AC110~220V
Size: Gun:19*15cm
Pump:20.5cm
Tweezers#1:14.5cm #2:12.5cm
ring holder:3.5*4.2cm
Screwdriver:13cm
Weight: Tin Wire Roll:50g
Product:425g/14.99oz/0.94lb
Package include:(As your choice)
7PCS(1x 80W Gun+1x Pump+1x Tin Wire+2x Tweezers+1x Solder wire holder+1x screwdriver)
OR 1x 60W Gun + 1x 1.0mm Solder Wire
