You are buying a BRAND NEW Engine Pro MC22396 Mechanical Flat Tappet Camshaft!
This is a flat tappet cam for 1967-95 CHEVROLET Big Block V8 396, 402, 427, 454 C.I./1969-90 366 C.I. Engines.
Camshaft Specifications:
- Duration @ .050": Intake: 242 Exhaust: 242
- Advertised Duration: Intake:310 Exhaust: 297
- Valve Lift: Intake: .508 Exhaust: .496
- Lobe Separation: Intake: 108 Exhaust: 120
- Idle: LASH .020 INT .024 EXH VERY ROUGH
- Lifter Part #: 992 (not included)
- Comment: Street Strip, 9.5:1 compression, 3000 stall convertor or stick, lower gears -GM #3904362
- Note: NOT COMPUTER COMPATIBLE
General Stage 4 Camshaft Specifications:
- Idle Quality: Rough. Manifold Vacuum Will Not Operate Power Brakes
- Torque: Mid-Range 3000-4000 RPM
Recommendations:
- Racing: Bracket Drag Racing, Limited Oval Track
- Computer Controlled Vehicles: Not Recommended
- Transmission: Automatic With High Stall Converter or Manual
- Compression Ratio: 10.5:1 To 11.0:1. Check Valve to Piston Clearance
NOTE: Anytime you install a new camshaft, it should always have new lifters installed as cams and lifters create a wear pattern as they mate together.