ITEMS INCLUDED:
1 QT OPTION:
- 1 QUART TINTABLE BED LINER
- 1 BOTTLE ACTIVATOR
- 1 BOTTLE COLOR TONER (4OZ)
- 1 BOTTEL WAX AND GREASE REMOVER (6OZ)
- 1 ROLL MASKING TAPE
- 1 SCUFF PAD
- 6 PAPER TOWELS
2 QT OPTION:
- 2 QUARTS TINTABLE BED LINER
- 2 BOTTLES ACTIVATOR
- 2 BOTTLES COLOR TONER (4OZ EACH)
- 1 BOTTEL WAX AND GREASE REMOVER (6OZ)
- 1 ROLL MASKING TAPE
- 1 SCUFF PAD
- 6 PAPER TOWELS
3 QT OPTION:
- 3 QUARTS TINTABLE BED LINER
- 3 BOTTLES ACTIVATOR
- 3 BOTTLES COLOR TONER (4OZ EACH)
- 1 BOTTEL WAX AND GREASE REMOVER (6OZ)
- 1 ROLL MASKING TAPE
- 1 SCUFF PAD
- 6 PAPER TOWELS
4 QT OPTION:
- 4 QUARTS TINTABLE BED LINER
- 4 BOTTLES ACTIVATOR
- 4 BOTTLES COLOR TONER (4OZ EACH)
- 1 BOTTEL WAX AND GREASE REMOVER (6OZ)
- 1 ROLL MASKING TAPE
- 1 SCUFF PAD
- 6 PAPER TOWELS
4QT KIT
- 4 BOTTLES TINTABLE BED LINER
- 4 BOTTLES ACTIVATOR - 4 BOTTLES COLOR TONER (4OZ EACH)
- 1 BEDLINER SPRAY GUN WITH SPRAY TUBE EXTENSION
- 12 OZ WAX AND GREASE REMOVER
- 6 PAPER TOWELS
- 1 SANDING PAD
- 1 ROLL OF STANDARD MASKING TAPE
- 1 ROLL OF MASKING TAPE WITH PLASTIC LINER
INSTRUCTIONS:
1 - CLEAN WITH SOAP WATER, WHEN DRY USE REGULAR MASKING TAPE AROUND THE AREA TO BE SPRAYED (PICTURE 2).
2 - USE SANDING PAD TO SAND THE AREA TO INCREASE ADHESION. AFTER SANDING, WHIPE WITH DRY TOWEL, THEN WHIPE USING WAX AND GREASE REMOVER (PICTURE 3).
3 - USE MASKING TAPE WITH PLASTIC LINER TO PROTECT SURFACES AROUND THE AREA TO BE SPRAYED (PICTURE 4).
4 - USING MEASURING CUP, ADD ACTIVATOR TO BED LINER BOTTLE AND SHAKE FOR 2 MINUTES. TEST SPRAY USING SPRAYING GUN PROVIDED. ASJUST PRESSURE FOR DESIRED TEXUTRE.
5 - SPRAY 2 MEDIUM COATS WITH 15 MINUTES BETWEEN (PICTURE 5).
6 - WAIT 20 MINUTES. REMOVE MASKING TAPE (PICTURE 6).
DRYING TIME TO ASSEMBLY AND INSTALLATION - 72 HOURS.
FULL DRYING TIME - 7 DAYS.