Description
MP3 Bluetooth 5.0 Audio Receiver Modul Board Wireless Stereo Music
XY-WRBT Bluetooth Audio Receiver Board Bluetooth 5.0 Decoder Board Wireless Stereo Music 3.7-24V Wide Voltage Speaker PCB 3.5mm Audio Amplifiers ModuleThis is a small size and cost-effective Bluetooth 5.0 Audio Receiver module with auto-reconnect feature. It supports a wide range power supply of 3.7V~24V and comes with a function button. Dial the button to the left and right to adjust volume, and press it to pause or play. You can use this module to remake your loudspeaker into wireless.
Operating Instruction:
After the power is turned on, the blue indicator flashes quickly, and then the module enters the Bluetooth mode; After playing the “Beep”, it goes into the pairing mode, waiting for pairing; Turn on the Bluetooth of a phone, “XY-WRBT”(module Bluetooth name) will be searched and displayed, click “XY-WRBT” to connect to the board. It connects successfully with a Beep. When the indicator is always on, you can play your music on the phone, and the indicator keeps slowly blinking when playing music
XY-WRBT is a Bluetooth Audio Decoder Module. Dual channels audio signal output. It is ideal for DIY wireless Bluetooth speakers and transponders.
After the power is turned on, the blue indicator flashes quickly, and then the module enters the Bluetooth mode; After playing the “Beep”, it goes into the pairing mode, waiting for pairing; Turn on the Bluetooth of a phone, “XY-WRBT”(module Bluetooth name) will be searched and displayed, click “XY-WRBT” to connect to the board. It connects successfully with a Beep. When the indicator is always on, you can play your music on the phone, and the indicator keeps slowly blinking when playing music
XY-WRBT is a Bluetooth Audio Decoder Module. Dual channels audio signal output. It is ideal for DIY wireless Bluetooth speakers and transponders.
Features:
• Wireless Bluetooth control
• Knob adjustment
• Support reverse connection protection
• Support lithium battery charging
• Automatic re-connection
• Wireless Bluetooth control
• Knob adjustment
• Support reverse connection protection
• Support lithium battery charging
• Automatic re-connection
Specifications:
• Product name: XY-WRBT Bluetooth Audio Decoder Module
• Model: XY-WRBT
• Work Voltage: DC 3.7V-24V
• Communication distance:15meter(Max)
• Audio Output Interface:3.5mm audio socket
• Reverse connection Protection: Yes
• Product name: XY-WRBT Bluetooth Audio Decoder Module
• Model: XY-WRBT
• Work Voltage: DC 3.7V-24V
• Communication distance:15meter(Max)
• Audio Output Interface:3.5mm audio socket
• Reverse connection Protection: Yes
Use Steps:
• Choose the right amplifier module as shown in wiring diagram. Note: XY-WRBT is a decoder but not an amplifier. So it cannot connect to speaker directly.
• Connect to right power supply from input terminal. LED indicator will flashing and it means that module enters pairing mode. And then speak prompt voice and it means that module is waiting for pairing.
• Turn ON Bluetooth in phone.
• Select Bluetooth device ‘XY-WRBT’ in your Bluetooth device listing.
• LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
• Module will playing music after select music in phone. LED indicator will keep slowly blinking.
• Increase volume by turn right potentiometer.
• Decrease volume by turn left potentiometer.
• Press potentiometer to play or pause music.
• Module will speak prompt voice if disconnected.
• Choose the right amplifier module as shown in wiring diagram. Note: XY-WRBT is a decoder but not an amplifier. So it cannot connect to speaker directly.
• Connect to right power supply from input terminal. LED indicator will flashing and it means that module enters pairing mode. And then speak prompt voice and it means that module is waiting for pairing.
• Turn ON Bluetooth in phone.
• Select Bluetooth device ‘XY-WRBT’ in your Bluetooth device listing.
• LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
• Module will playing music after select music in phone. LED indicator will keep slowly blinking.
• Increase volume by turn right potentiometer.
• Decrease volume by turn left potentiometer.
• Press potentiometer to play or pause music.
• Module will speak prompt voice if disconnected.
Note:
• XY-WRBT is a decoder but not an amplifier. So it cannot connect to speaker directly. The output needs connect to amplifier at first and then connect speaker.
• XY-WRBT will automatically stop working if input voltage is less than 3.3V.
• If the battery voltage is too low, the audio signal will be distorted.
• The module can charge 3.7V lithium battery, but does not support charging or discharging protection function.
• Micro USB can be used for battery charge.
• It need keep short circuit for two pads at marked Wake about 2second to turn ON mode if module automatically stop working.
• XY-WRBT is a decoder but not an amplifier. So it cannot connect to speaker directly. The output needs connect to amplifier at first and then connect speaker.
• XY-WRBT will automatically stop working if input voltage is less than 3.3V.
• If the battery voltage is too low, the audio signal will be distorted.
• The module can charge 3.7V lithium battery, but does not support charging or discharging protection function.
• Micro USB can be used for battery charge.
• It need keep short circuit for two pads at marked Wake about 2second to turn ON mode if module automatically stop working.
Note:
• The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.
• Recommended power supply voltage DC 5~24V.Module will be damaged if input voltage is more than 26V.
• Input voltage cannot more than 16V if connect 4ohm speaker.
• Input voltage cannot more than 24V if connect 8ohm speaker.
• It is recommended to use a power supply of 2A or higher.
• Please don’t use too long wires to avoid signal interference.
• It is recommended to use a speaker above 40W to avoid speaker damage.
• Please read use manual and description before use.
• The power amplifier board should be as far away as possible from the WIFI signal (router) avoid signal interference.
• Recommended power supply voltage DC 5~24V.Module will be damaged if input voltage is more than 26V.
• Input voltage cannot more than 16V if connect 4ohm speaker.
• Input voltage cannot more than 24V if connect 8ohm speaker.
• It is recommended to use a power supply of 2A or higher.
• Please don’t use too long wires to avoid signal interference.
• It is recommended to use a speaker above 40W to avoid speaker damage.
• Please read use manual and description before use.
Application:
• Modified speaker
• Amplifier equipment
• Car Bluetooth device
• Modified speaker
• Amplifier equipment
• Car Bluetooth device
Package Include:
• 1 x Bluetooth 5.0 Audio Receiver Wireless
• 1 x Bluetooth 5.0 Audio Receiver Wireless