This Closed-loop Stepper Driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive and an internal encoder which is used to close the position, velocity and current loops in real time, just like servo systems. It combines the best of servo and stepper motor technologies, and delivers unique capabilities and enhancements over both, while at a fraction of the cost of a servo system.
This CNC kit included:
- 3 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor CL57T-V41
- 3 x Nema 23 Closed Loop Stepper Motor 3.0 Nm/424.83oz.in Encoder 1000CPR
- 1 x 400W 36V 11A Switching Power Supply
- 3 x 1.7m Long Encoder Extension Cable for Closed Loop Stepper Driver
- 3 x RV-4 AWG20 1.7m Long Motor Extension Cable with GX16 Aviation Plug
- 1x RS232 Debugging Cable
- 1x Driver CL57T User Manual
Motor Specification:
Part Number: 23HS45-4204D-E1000
- Number of phase: 2
- Holding Torque: 3Nm(424.83oz.in)
- Rated Current/phase: 4.2A
- Phase Resistance: 0.82ohms
- Inductance: 3.6mH ± 20%(1KHz)
- Frame Size: 57 x 57mm
- Body Length: 138mm
- Shaft Diameter: 8mm
- Shaft Length: 21mm
- D-CUT Shaft Length: 15mm
- Lead Length: 300mm
Encoder Specification:
Output Circuit Type: Differential type
Encoder Type: Optical Incremental
Encoder Resolution: 1000PPR(4000CPR)
Output Signal Channels: 2 channels
Supply Voltage Min: 4V
Supply Voltage Max: 5V
Output Current: 100mA
Output High Voltage: 5V
Output Low Voltage: 4.5V
Output Frequency Max: 60kHZ
Encoder Type: Optical Incremental
Encoder Resolution: 1000PPR(4000CPR)
Output Signal Channels: 2 channels
Supply Voltage Min: 4V
Supply Voltage Max: 5V
Output Current: 100mA
Output High Voltage: 5V
Output Low Voltage: 4.5V
Output Frequency Max: 60kHZ
2-Phase Hybrid Stepper Servo Driver CL57T V4.1
Key Features:
- A new generation of 32-bit DSP control technology, cost-effective, stable and excellent vibration performance
Voltage input range: DC24V-50V, a total of 16 subdivisions.
The highest impulse response frequency is up to 200KHz.
The torque attenuation is small and the speed can reach 3000 rpm.
Built-in in place and alarm output for easy detection and control.
Intelligently regulates current, reduces vibration, noise and heat, and increases efficiency by 35%.
With single and double pulse selection function, the factory default is: pulse + direction control.
Excellent high-speed performance and rigidity, the perfect combination of servo and stepping advantages.
Electrical Specifications:
Output Peak Current: 0~8A
Input Voltage: +24~48VDC (Typical 36VDC)
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~200kHz
Pulse Width: 2.5μS
Isolation Resistance: 500MΩ
Power Supply Specification
36VDC 11A output
AC input voltage range:93~132V/176~264VAC
115V/230V AC selected by switch
High efficiency low cost
Free air cooling convection
Low output ripple and yawp
Over current, over voltage, short circuit and overheat protections
215*115*50mm (L*W*H)
AC input voltage range:93~132V/176~264VAC
115V/230V AC selected by switch
High efficiency low cost
Free air cooling convection
Low output ripple and yawp
Over current, over voltage, short circuit and overheat protections
215*115*50mm (L*W*H)
Am 17.02.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: