Very Easy to Fit Door Weather Drip Bar complete with fixings

Only sample bars are without screws and end caps

Will never rot unlike wooden weather bars due to the nature of the application

We have been manufacturing & installing windows, doors & glass for 29 years.
 We only sell tried & tested products that we use on a daily basis

Free Postage & packing please see tab above


Made in England by Deceuninck

Lengths from 100mm up to 2400mm

End Caps & Screws are supplied with each weather bar

Additional spare end caps available £3.25 or £3.60


We can cut lengths to suite please purchase the next size
up and leave the size required in notes when ordering

Any Item over 900mm in length cannot be
despatched to the below destinations free of charge

Channel Islands 
Isle of Man 
Isle of Wight 
Northern Ireland 
Scilly Isles 
Scottish Highlands 
Scottish Islands 
Also including postcodes AB31-38 & AB40-56
 
A carriage charge will be advised prior to despatch
Cancelation will be an option before despatch

Brown Oak is also known as Light Oak, Sherwood or Golden Oak

Please note - marks may be evident due to being a factory product but

will wipe off or if required, a mild abrasive can be used like Vim or any cream cleaner

Used on all types of uPVC, composite, aluminium, wooden doors & windows

Used on tilt & turn windows also may be used on the head of any window

Keeps the bulk of water away from the bottom of a door

Made from virgin lead free UV stable strong uPVC


Size of bar 23mm high x 18mm wide (Projection) and length of your choice

Can be fitted in a few minutes, very simple to fit 

Will fit most doors and windows

Complete with screws and end caps unless its a sample bar

The end caps can be held in place with silicone or superglue

These are high quality weather bars that will not fade or change colour in sunlight

Measuring & Fitting Instructions

Simply cut the drip bar to the required length
(with a junior hack saw or ask us to cut it for you, this is a free of charge service),
 width of door sash for best results the bar should finish approx.
5 - 10mm from each end of the door frame when closed

Fitting Tip

Drill a 3 - 2mm hole through the weather bar equally spaced
or if you have an battery screwdriver you may drive the self tapper screws without a pilot hole,
the bottom of the drip bar should be about 15mm above the highest part of the bottom
of the threshold that the door seals to when closed.
This allows for any expansion or movement you may experience over the years.
The end caps require a contact adhesive, super glue or silicone and push to fit.

Please check all measurements and suitability before ordering.

Exact product colour displayed may vary depending
on setup and quality of the device used to view.


Any Item sent back with buyers remorse will be subject to a discretionary charge of 
25%
of the full sales price or £1.50 flat fee, dependant on which one is the greater

Open Monday - Thursday 7.30am - 4.30pm

Friday 7.30am - 1.30pm