Output and Runtime

• Regular mode: Four brightness levels
• Led lumen: 118010/536/104/8
• ANSI FL-1 lumen: 98011/449/86/7
• Runtime (hours): 18/1.9/11/100+
• Tactical mode (default): Two brightness levels + two strobe @ 100% output
• Led lumen: 118010/172/Strobe I/Strobe II
• ANSI FL-1 lumen: 98010/141
• Runtime: 18/7
• Seven hidden auxiliary outputs
• Strobe/Disoriented strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)

Other features

• LED direct soldering on copper for maximum heatsink ability
• User replaceable glass lens
• Tactical rubber cigar grip (replaceable with grip cover)
• Battery reverse polarity protection
• User removable pocket clip
• Tail stand ability with included tail stand boot
• Waterwhite glass lens w/ harden treatment
• Anti-reflective (AR) coating on both side (96% transparency)

Beam Profile

• CREE XM-L2 U2 LED
• Center lux: 62,000 lux
• Center spot angle: 5.7°
• Spill light angle: 53.1°
• Beam distance: 544 yards / 498 meters

Operations

• Tactical forward clicky switch
• Basic
• Turn on the light by pressing the tailcap button until it clicks.
• Twist the head to select between four pre-defined output levels.
• You can pre-selected output level before turning on the light.
• Advanced
• Cycle through auxiliary modes: Tighten the head (1st level), and loosen to 3rd (or 4th level) and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
• Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.
• Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
• Energy saving feature (on by default): M25C2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, M25C2 reduces output by 9% instead. To toggle this feature, twist the head to 4th level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).

What's Included:

• Spare O-Rings
• Titanium coated stainless steel pocket clip
• User manual
• Tail-Stand rubber boot
• Soft Cigar holding grip
• Cigar grip cover ring
• Lanyard ring attachment ring
• Mil-spec paracord lanyard with quick attachment clip
• M25C2 flashlight with smooth aluminum head

Kit version

• Items listed in what's included
• M25C2 flashlight with stainless steel bezel
• Front thread flashlight head
• 3 cells extension body tube for three CR123A/RCR123A
• 4 cells extension body tube for four CR123A or two 18650 li-ion
• Battery spacer for 3 cell and 4 cell extension tube