eBay

Smart TV Box Android Quad Core HDMI 1080P Wifi Streaming Media Player UK

Standing Wave Ratio SWR Watt Meter Radio Station Forward 300W Reflected 60W Panel VU Power Meter Transmitter with Backlight
Specification:
1 Movable part: Movable coil type
2 Appearance drawing: See attached page for details
3 Pointer material: Zinc-nickel alloy
Pointer color: Black
Pointer swing direction: From left to right
Pointer length: 49 ±1mm, from the needle end to the axis
Pointer width: 0.45 ±0.05 mm
4 Cover material: PMMA
5 Lower cover material: ABS
6 Magnet material: AlNiCo sintered magnet
7 Frame material: SPCC
8 Enameled wire material: UEW polyurethane copper wire
9 The meter placement position: Vertical
10 Wire: 2 X 200mm#28 wires, one black and one red. They are used to solder LED positive/negative poles. The end of the wire needs 5mm of copper to be exposed for easy soldering.
11 Backlight type 1: Two LED are connected in series "6V, 20mA", connected to a resistor, 620Ω1/2W
Type 2: Two LED in series "6V, 20mA", connect a resistor, 1.3KΩ1/2W
12. Product size: 72*72*31mm

Electrical performance:
Standard test conditions: Temperature 20 degree, humidity 70%.
If there is no difference in the test results, it can also be carried out in a normal temperature and humidity environment.
1 Current sensitivity: The direct current required for the pointer to be at the zero scale to the position shown on the scale plate.
2 Maximum current sensitivity: 200uA ±8% of the DC current required by the pointer at the zero scale to the full scale position of the scale.
3 Internal DC impedance: 750Ω ±8%.
4 Insulation resistance: Test its insulation value with a 500V DC voltage, and the insulation resistance between the meter casing and the electrical circuit is above 50MΩ.
5 Friction: After adding the sensitivity current to the meter, it is slowly reduced to zero. The error between the pointer indication position and the zero scale center is ± 1mm.
6 Zero position: The meter is in the standard position, the zero-scale center is the reference, and the deviation between the pointer position and the zero-scale center is ± 1mm.
7 Balance: When the meter is tilted forward and backward 90 degrees relative to the standard position, the deviation between the position of the pointer and the center of the zero scale is ± 1mm.
8 Pointer sticking: An overcurrent of three times the full-scale current is added instantaneously, and it will slowly decrease to 1/2 of the full-scale current after 7 seconds. At this time, the pointer may stick to the bottom due to the difference in ambient temperature and humidity, but the pointer should Return to the specified range, within 1/2 range.
9 Pointer swing: The maximum current is added in a linear manner within 5 seconds, and then reduced to zero in a linear manner within 5 seconds, the pointer swings without stopping and other abnormal conditions.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.

Payment

Payment

We accept PayPal only.

Payment must be received within 3~5 business day Days from the date of purchase.

Please leave note in PayPal when making the payment if you have any special request (colors/size).

Orders will be processed instantly and dispatched in 1 business day normally, so we do NOT accept any Email/ Message note before or after you place orders.

Shipping

Shipping

We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product and would like to return.

All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.

We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

Buyer is responsible for return shipping cost.

Returns

Ruturns

We offer WORLDWIDE SHIPPING. (Except China, Italy, and Croatia)

Orders will be processed and dispatched within 24-48 hours after payment is clear.

We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

If you have not received your shipment within 30 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!

Please note that estimated delivery time is depended on destination countries, and may subject to customs clearance process, and weather condition in your area.

Feedback

Feedback

If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem

Please DON'T leave negative or neutral feedback if you haven't received item in 7 days, because we have mentioned the shipping time repeatedly

contact us

How to contact us ?

1��Sent a email by ebay to tell us what you need(like a refound,do not receive your item ect.)

2��Add this facebook ID,if you want to know more about items information,other wise just sent email to us in ebay.thank you.

DESCRIPTION

PAYMENT

SHIPPING

RETURN POLICY

CONTACT US

Description:

Standing Wave Ratio SWR Watt Meter Radio Station Forward 300W Reflected 60W Panel VU Power Meter Transmitter with Backlight
Specification:
1 Movable part: Movable coil type
2 Appearance drawing: See attached page for details
3 Pointer material: Zinc-nickel alloy
Pointer color: Black
Pointer swing direction: From left to right
Pointer length: 49 ±1mm, from the needle end to the axis
Pointer width: 0.45 ±0.05 mm
4 Cover material: PMMA
5 Lower cover material: ABS
6 Magnet material: AlNiCo sintered magnet
7 Frame material: SPCC
8 Enameled wire material: UEW polyurethane copper wire
9 The meter placement position: Vertical
10 Wire: 2 X 200mm#28 wires, one black and one red. They are used to solder LED positive/negative poles. The end of the wire needs 5mm of copper to be exposed for easy soldering.
11 Backlight type 1: Two LED are connected in series "6V, 20mA", connected to a resistor, 620Ω1/2W
Type 2: Two LED in series "6V, 20mA", connect a resistor, 1.3KΩ1/2W
12. Product size: 72*72*31mm

Electrical performance:
Standard test conditions: Temperature 20 degree, humidity 70%.
If there is no difference in the test results, it can also be carried out in a normal temperature and humidity environment.
1 Current sensitivity: The direct current required for the pointer to be at the zero scale to the position shown on the scale plate.
2 Maximum current sensitivity: 200uA ±8% of the DC current required by the pointer at the zero scale to the full scale position of the scale.
3 Internal DC impedance: 750Ω ±8%.
4 Insulation resistance: Test its insulation value with a 500V DC voltage, and the insulation resistance between the meter casing and the electrical circuit is above 50MΩ.
5 Friction: After adding the sensitivity current to the meter, it is slowly reduced to zero. The error between the pointer indication position and the zero scale center is ± 1mm.
6 Zero position: The meter is in the standard position, the zero-scale center is the reference, and the deviation between the pointer position and the zero-scale center is ± 1mm.
7 Balance: When the meter is tilted forward and backward 90 degrees relative to the standard position, the deviation between the position of the pointer and the center of the zero scale is ± 1mm.
8 Pointer sticking: An overcurrent of three times the full-scale current is added instantaneously, and it will slowly decrease to 1/2 of the full-scale current after 7 seconds. At this time, the pointer may stick to the bottom due to the difference in ambient temperature and humidity, but the pointer should Return to the specified range, within 1/2 range.
9 Pointer swing: The maximum current is added in a linear manner within 5 seconds, and then reduced to zero in a linear manner within 5 seconds, the pointer swings without stopping and other abnormal conditions.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.

Package included:

1 X Power Meter

PaymentShippingReturnsFeedbackcontact us

We accept PayPal only.

Payment must be received within 3~5 business Days from the date of purchase.

Please leave note in PayPal when making the payment if you have any special request (colors/size).

Orders will be processed instantly and dispatched in 1-2 business day normally, so we do NOT accept any Email/ Message note before or after you place orders.

We Ship to Worldwide.

Orders will be processed and dispatched within 24-48 hours after payment is clear.

We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

If you have not received your shipment within 30 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!

We offer 30 days return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product and would like to return.

All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.

We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

Please DON'T leave negative or neutral feedback if you haven't received item in 7 days, because we have mentioned the shipping time repeatedly.

1. Sent an email by ebay to tell us what you need(like a refound,do not receive your item ect.)

2. Add this facebook ID,if you want to know more about items information,other wise just sent email to us in ebay.thank you.

DataCaciques