Suitable for G850/G840H/G840S/G900 with type c power port

Warm tips: Please make sure the ACC and BAT are connected correctly.

Time-lapse function: After WOLFBOX mirror dash cam is connected to this dedicated hardwire kit and turn the time-lapse function on the dash cam, the camera will enter the time-lapse recording function automatically when the car engine is off. In this mode, it records one frame per second, which extremely saves power and capacity, you don't need to worry about draining out of the car battery. This is because when the car engine is off, the ACC will have no power, and the dash cam will detect it and change recording mode from normal to time-lapse.

-Instructions for installation-

1. Stop the engine.

2. Open the fuse box.

3. Use a power detector to detect the constant power and ACC power (emergency power). *note: Use an ACC power supply of 15A to 25A. Use a constant power supply below 30A.

4. Connect the yellow fuse to the constant power source, the red fuse to the ACC power source, and the ground terminal (black wire) to the metal part of the body.

The yellow cable should be connected to the fuse of the constant power supply in the car fuse box. If you are looking for a constant power supply in the fuse box: Use a voltage tester to check the fuse to ensure it still have electricity even if the car engine is off.

Connect the red cable supply power only when the car engine starts. Testing method : The tester bulb will light when the engine if on and won't light when the engine is off.

Connect this black cable(GND) to the metal part of the vehicle. Most cars have screws or metal parts next to the fuse box. Connect the black cable to the screw or metal part. (As in the picture below)