This Listing is for 1x CISCO WS-C2960XR-48LPD-I
48x10/100/1000 POE+ 1xMan 2x Ten Gigabit SFP+ IPLite 1xPSU
Item Description
This listing is for 1 x CISCO WS-C2960XR-48LPD-I 48x10/100/1000 POE+ 1xMan 2x Ten Gigabit SFP+ IPLite 1xPSU
The Cisco Switch has IPLite Licence
Upgraded Cisco IOS Software 15.2(6)E1 Fully tested with Test Sheet Fans tested quiet,
1x PSU PWR-C2-640WAC Rackmount Kit Included !!
MAY HAVE MARKS AND SCRATCHES DUE TO USE DOES NOT AFFECT FUNCTIONALITY ASK FOR FUTHER DETAILS!
Library Photos Shown
VAT invoice can be provided on request for your purchase we are now VAT registered.
NO ACCESSORIES OR CABLES Included unless otherwise stated
Note: All items are fully tested and factory reset. They are also booted up before packaging. Items may have some marks or scratches due to use but this will not affect functionality. NO ACCESSORIES OR CABLES Included unless otherwise stated. It is the end users responsibility to follow the manufactures licencing agreements and carry the correct licences for the products in use we are not responsible for any failures to do this.
***If you have any networking kit for sale working or faulty, servers or anything networking related please get in touch we can offer a price quickly and at a reasonable price this helps keep the kit from being scrapped and heading for landfill.***
Printout Below
cisco WS-C2960XR-48LPD-I (APM86XXX) processor (revision V01) with 524288K bytes of memory. Processor board ID FDO1737XX3 Last reset from power-on 1 Virtual Ethernet interface 1 FastEthernet interface 50 Gigabit Ethernet interfaces 4 Ten Gigabit Ethernet interfaces The password-recovery mechanism is enabled. 512K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address : 50:17:FF:22:XX Motherboard assembly number : 73-15627-02 Power supply part number : 341-0531-01 Motherboard serial number : FDO17370XX Power supply serial number : DCB173XX Model revision number : V01 Motherboard revision number : A0 Model number : WS-C2960XR-48LPD-I Daughterboard assembly number : 73-14200-03 Daughterboard serial number : FDO1735XX System serial number : FDO1737BXX Top Assembly Part Number : 68-5005-01 Top Assembly Revision Number : A0 Version ID : V01 CLEI Code Number : CMMKF10ARA Daughterboard revision number : A0 Hardware Board Revision Number : 0x06 Switch Ports Model SW Version SW Image ------ ----- ----- ---------- ---------- * 1 54 WS-C2960XR-48LPD-I 15.2(7)E6 C2960X-UNIVERSALK9-M Configuration register is 0xF Switch#show post Stored system POST messages: Switch 1 --------- POST: MA BIST : Begin POST: MA BIST : End, Status Passed POST: TCAM BIST : Begin POST: TCAM BIST : End, Status Passed POST: Inline Power Controller Tests : Begin POST: Inline Power Controller Tests : End, Status Passed POST: Thermal Tests : Begin POST: Thermal Tests : End, Status Passed POST: PortASIC Stack Port Loopback Tests : Begin POST: PortASIC Stack Port Loopback Tests : End, Status Passed POST: PortASIC Port Loopback Tests : Begin POST: PortASIC Port Loopback Tests : End, Status Passed POST: EMAC Loopback Tests : Begin POST: EMAC Loopback Tests : MAC Loopback Passed POST: EMAC Loopback Tests : PHY Loopback Passed POST: EMAC Loopback Tests : End, Status Passed Switch#dir flash: Directory of flash:/ 2 -rwx 22946 May 12 2014 07:53:59 +00:00 express_setup.debug 3 drwx 512 Aug 9 2023 08:30:35 +00:00 pnp-info 7 drwx 512 Jun 16 2022 01:58:26 +00:00 c2960x-universalk9-mz.152-7.E6 498 drwx 512 Aug 9 2023 08:49:22 +00:00 pnp-tech 503 -rwx 5144 Sep 12 2023 12:50:06 +00:00 multiple-fs 501 drwx 512 Jun 16 2022 01:58:31 +00:00 dc_profile_dir 122185728 bytes total (80136192 bytes free) Switch#show inventory NAME: "1", DESCR: "WS-C2960XR-48LPD-I" PID: WS-C2960XR-48LPD-I, VID: V01 , SN: FDO1737XXX NAME: "Switch 1 - Power Supply 1", DESCR: "FRU Power Supply" PID: PWR-C2-640WAC , VID: V01D , SN: DCB1731XXX Switch#show license Index 1 Feature: iplite Period left: Life time License Type: Permanent License State: Active, In Use License Priority: Medium License Count: Non-Counted
Manufacturer Specification Below
Cisco® Catalyst® 2960-X and 2960-XR Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). They operate on Cisco IOS® Software and support simple device management as well as network management. The Cisco Catalyst 2960-X and 2960-XR Series provide easy device onboarding, configuration, monitoring, and troubleshooting. These fully managed switches can provide advanced Layer 2 and Layer 3 features as well as optional Power over Ethernet Plus (PoE+) power. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure, and energy-efficient business operations with intelligent services. The switches deliver enhanced application visibility, network reliability, and network resiliency.
Cisco Catalyst 2960-X Series Switches
Product Highlights
Cisco Catalyst 2960-X and 2960-XR Series Switches feature:
â?   24 or 48 Gigabit Ethernet ports with line-rate forwarding performance
â?   4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks
â?   PoE+ support with a power budget of up to 740W and Perpetual PoE
â?   Cisco IOS LAN Base[1] or LAN Lite1 and Cisco IOS IP Lite[2]
â?   Device management with web UI, over-the-air access via Bluetooth, Command-Line Interface (CLI), Simple Network Management Protocol (SNMP), and RJ-45 or USB console access
â?   Network management with Cisco Prime®, Cisco Network Plug and Play, and Cisco DNA Center
â?   Stacking with FlexStack-Plus and FlexStack-Extended
â?   Layer 3 features with routed access (Open Shortest Path First [OSPF]), static routing, and Routing Information Protocol (RIP)
â?   Visibility with Domain Name System as an Authoritative Source (DNS-AS) and Full (Flexible) NetFlow
â?   Security with 802.1X, Serial Port Analyzer (SPAN) and Bridge Protocol Data Unit (BPDU) Guard
â?   Reliability with higher Mean Time Between Failures (MTBF) and Enhanced Limited Lifetime Warranty
(E-LLW)
â?   Resiliency with optional dual field-replaceable power supplies2
Power Supply
An external redundant power supply option is supported on the Cisco Catalyst 2960-X Series Switches. These switches come with one fixed power supply and an option for an external redundant power supply (Cisco Redundant Power System [RPS] 2300).
Dual redundant power supplies are supported on the Cisco Catalyst 2960-XR Series Switches. These switches ship with one power supply by default. The second power supply can be purchased at the time of ordering the switch or as a spare. These power supplies have built-in fans to provide cooling (Figure 2).
Cisco Catalyst 2960-XR Series power supply
Table 1 shows the different power supplies available in the 2960-XR Series switches and the available PoE power. Table 2 lists the PoE and PoE+ power capacity for the Cisco Catalyst 2960-X and 2960-XR Series. Table 3 gives the available PoE and switch power for the 2960-XR Series with different power supply combinations.
Table 1.          Cisco Catalyst 2960-XR Series default power supply configurations
Product ID | Default power supply | Available PoE power |
WS-C2960XR-24TS-I WS-C2960XR-48TS-I WS-C2960XR-24TD-I WS-C2960XR-48TD-I | PWR-C2-250WAC | â?? |
WS-C2960XR-24PD-I WS-C2960XR-48LPD-I WS-C2960XR-24PS-I WS-C2960XR-48LPS-I | PWR-C2-640WAC | 370W |
WS-C2960XR-48FPD-I WS-C2960XR-48FPS-I | PWR-C2-1025WAC | 740W |
Table 2.          Cisco Catalyst 2960-X and 2960-XR Series PoE and PoE+ power capacity
Model | Maximum number of PoE+ (IEEE 802.3at) ports* | Maximum number of PoE (IEEE 802.3af) ports* | Available PoE power (single PS source) |
Cisco Catalyst 2960X-48FPD-L | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
Cisco Catalyst 2960X-48LPD-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960X-24PD-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960X-48FPS-L | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
Cisco Catalyst 2960X-48LPS-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960X-24PS-L | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960X-24PSQ-L | 3 ports up to 30W | 7 ports up to 15.4W | 110W |
Cisco Catalyst 2960XR-48FPD-I | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
Cisco Catalyst 2960XR-48LPD-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960XR-24PD-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960XR-48FPS-I | 24 ports up to 30W | 48 ports up to 15.4W | 740W |
Cisco Catalyst 2960XR-48LPS-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Cisco Catalyst 2960XR-24PS-I | 12 ports up to 30W | 24 ports up to 15.4W | 370W |
Table 3.          Cisco Catalyst 2960-XR Series available PoE and switch power capabilities with different combinations of power supplies
Primary power supply | Secondary power supply | Available power for PoE+ | Switch power redundancy | Available PoE power when one PS fails |
PWR-C2-250WAC | â?? | â?? | No | â?? |
PWR-C2-250WAC | PWR-C2-250WAC | â?? | Yes | â?? |
PWR-C2-640WAC | â?? | 370W | No | â?? |
PWR-C2-640WAC | PWR-C2-640WAC | 370W | Yes | 370W |
PWR-C2-1025WAC | â?? | 740W | No | â?? |
PWR-C2-1025WAC | PWR-C2-1025WAC | 740W | Yes | 740W |
Switch Models and Configurations
Cisco Catalyst 2960-X Series Switches include a single, fixed power supply and are available with either the Cisco IOS LAN Base or LAN Lite feature set. Cisco Catalyst 2960-XR Series Switches include a field-replaceable modular power supply and can accommodate a second power supply. The 2960-XR Series is available only with the Cisco IOS IP Lite feature set. Tables 4 and 5 list the configurations of the 2960-X and 2960-XR Series, respectively.
Table 4.          Cisco Catalyst 2960-X Series configurations
Model | 10/100/1000 Ethernet ports | Uplink interfaces | Cisco IOS Software image | Available PoE power | FlexStack-Plus and FlexStack-Extended capability |
Cisco Catalyst 2960X-48FPD-L | 48 | 2 SFP+ | LAN Base | 740W | Y |
Cisco Catalyst 2960X-48LPD-L | 48 | 2 SFP+ | LAN Base | 370W | Y |
Cisco Catalyst 2960X-24PD-L | 24 | 2 SFP+ | LAN Base | 370W | Y |
Cisco Catalyst 2960X-48TD-L | 48 | 2 SFP+ | LAN Base | â?? | Y |
Cisco Catalyst 2960X-24TD-L | 24 | 2 SFP+ | LAN Base | â?? | Y |
Cisco Catalyst 2960X-48FPS-L | 48 | 4 SFP | LAN Base | 740W | Y |
Cisco Catalyst 2960X-48LPS-L | 48 | 4 SFP | LAN Base | 370W | Y |
Cisco Catalyst 2960X-24PS-L | 24 | 4 SFP | LAN Base | 370W | Y |
Cisco Catalyst 2960X-24PSQ-L | 24 (8 PoE) | 2 SFP, 2Â 10/100/1000BT | LAN Base | 110W | â?? |
Cisco Catalyst 2960X-48TS-L | 48 | 4 SFP | LAN Base | â?? | Y |
Cisco Catalyst 2960X-24TS-L | 24 | 4 SFP | LAN Base | â?? | Y |
Cisco Catalyst 2960X-48TS-LL | 48 | 2 SFP | LAN Lite | â?? | â?? |
Cisco Catalyst 2960X-24TS-LL | 24 | 2 SFP | LAN Lite | â?? | â?? |
Table 5.          Cisco Catalyst 2960-XR Series configurations
Model | 10/100/1000 Ethernet ports | Uplink interfaces | Cisco IOS Software image | Available PoE power | Power supply | FlexStack-Plus and FlexStack-Extended capability |
Cisco Catalyst 2960XR-48FPD-I | 48 | 2 SFP+ | IP Lite | 740W | 1025WAC | Y |
Cisco Catalyst 2960XR-48LPD-I | 48 | 2 SFP+ | IP Lite | 370W | 640WAC | Y |
Cisco Catalyst 2960XR-24PD-I | 24 | 2 SFP+ | IP Lite | 370W | 640WAC | Y |
Cisco Catalyst 2960XR-48TD-I | 48 | 2 SFP+ | IP Lite | â?? | 250WAC | Y |
Cisco Catalyst 2960XR-24TD-I | 24 | 2 SFP+ | IP Lite | â?? | 250WAC | Y |
Cisco Catalyst 2960XR-48FPS-I | 48 | 4 SFP | IP Lite | 740W | 1025WAC | Y |
Cisco Catalyst 2960XR-48LPS-I | 48 | 4 SFP | IP Lite | 370W | 640WAC | Y |
Cisco Catalyst 2960XR-24PS-I | 24 | 4 SFP | IP Lite | 370W | 640WAC | Y |
Cisco Catalyst 2960XR-48TS-I | 48 | 4 SFP | IP Lite | â?? | 250WAC | Y |
Cisco Catalyst 2960XR-24TS-I | 24 | 4 SFP | IP Lite | â?? | 250WAC | Y |
Shipping
All larger items are shipped via a Next Day service We aim to ship on the same day but if our courier has already collected usually around 1pm we cannot ship until the next day please ask for further details. Once payment has been received items will be collected by either the same day or next day for delivery the following day (1 Working Day Processing). If you require a faster service please contact before purchasing. Smaller items may be shipped by Royal Mail first class. Items purchased outside the UK will be processed using Ebay Global Shipping Service please ask if you require a faster service and we will get a quote. All shipping payments and processing is done via Ebay. Global shipping will show multiple tracking numbers to track its progress. Please note this may take longer than the specified shipping and dispatch times.
Payment
Payment by PayPal only. A VAT invoice can be provided on request for your purchase we are VAT registered.
Returns
In the unlikely event of an issue with your purchase. Please contact directly as soon as possible so we can help with any issues. If we cannot resolve the issue we will help get the item back to us for a Full Refund.
Note: All items are fully tested and factory reset. They are also booted up before packaging. Items may have some marks or scratches due to use but this will not affect functionality.