INCLUDING RACK EARS
EXCLUDING NETWORK CABLES
See photos for actual item!
Price is for 1 item.
AudioCodes MP124/16S/AC/SIP Technical Specifications
MediaPack Series Features
- Scales 2 to 24 analog ports
- Supports PSTN/PBX analog telephone sets or analog trunk lines (FXS/FXO)
- Selectable, multiple LBR coders per channel
- T.38 compliant
- Rich subscriber Feature Set including; 3-Way conference with local mixing, call pickup, hunt groups, call forwarding, call hold, call transfer
- Echo cancelation, Jitter Buffer, VAD and CNG
- Complies with SIP, MGCP and H.323 (V4) control protocols
- Enhanced capabilities which include MWI, long-haul, metering tones, STUN, Security features andCaller ID.
- Standalone Survivability (SAS) for SIP based hosted communications and centralised IP-PBX applications
- Web Management for easy configuration and installation
- EMS for comprehensive management operations (FCAPS)
- Voice quality monitoring support via AudioCodes Session Experience Manager (SEM).
- Automatic, secured provisioning. Useful for large-scale deployments
- Internal Access List firewall for network traffic filtering
Interfaces
- Voice Ports: 24 ports
- Telephone Interfaces: FXS, 50-pin Telco, Connector
- Lifeline: Automatic cut through of a single analog line
- Network Interface: 10/100 BASE-T, RJ45
- Indicators: Channel status and activity LEDs
Voice, Fax, Modem
- Voice over Packet capabilities: G.168-2004 Echo Cancelation, VAD, CNG, Dynamic programmable Jitter, modem detection and auto-switch to PCM
- Voice Compression: G.711, G.723.1, G.726 ADPCM, G.727 ADPCM, G.729A/B, G.722
- Fax over IP: T.38 compliant, Group 3 fax relay up to 14.4 kbps with automatic switching to PCM or ADPCM
- 3-Way Conference: 3-Way conference with local mixing
- VLAN QoS: DiffServ, TOS, 802.1 p/Q VLAN tagging, RTCP-XR
- IP Transport (bandwidth): RTP/RTCP per IETF RFC 3550 and 3551
Signalling
- Signalling: FXS Loop-start
- In-band Signaling DTMF (TIA 464B): User-defined and call progress tones
- Out-of-Band Signaling: DTMF Relay (RFC 2833), DTMF via SIP INFO/NOTIFY
- Control SIP: (RFC 3261), MGCP (RFC 2- 05), H.323 (V4),
Provisioning
- Protocols: BootP, DHCP, TFTP and HTTP for Automatic Installation, DHCP options 66.67 in auto update mode, Remote management using Web browser, EMS (Element Management System) / SNMP V3, RS-232 for basic configuration (via CLI), Voice Menu using touch tone phone for basic configuration
Security
- Media: SRTP
- Control: H.235, IPSEC, TLS/SIPS
- Management: HTTPS, Access List, IPSEC
Additional Features
- Message Waiting Indication: Applying 100V DC online for lighting bulb in handset, FSK, Stutter Dial Tone
- PSTN Fallback: Support of PSTN fallback due to Power failure, if the IP connection is down or due to customer defined IP QOS thresholds
- Stand Alone Survivability (SAS): Supports SAS of up to 25 SIP users (UA) per MediaPack
- Ring voltage: Sine: 54 VRMS typical (balanced ringing only)
- Ring Frequency: 25-100Hz
- Voice Quality Monitoring: AudioCodes Session Experience Manager (SEM)
- Maximum Ringer Load: REN3
- Loop Impedance (Including Phone impendance): Up to 1500 ohm for the MP-11x, Up to 1600 ohm for the MP-124
- Line current up to 32 MA on 4 ports
- Lifeline Supported in all ports of Mixed FXS/FXO and in first port of MP-114/FXS and MP-118/FXS using special Lifeline cable
- Caller ID: Bellcore GR-30-CORE Type 1 using Bell 202 FSK modulation, ETSI Type 1, NTT, Denmark, India, Brazil, British and DTMF ETSI CID(ETS 300-659-1)
- Polarity Reversal / Wink: Immediate or smooth to prevent erroneous ringing
- Metering Tones: 12/16 KHz sinusoidal bursts, Generation on FXS
- Distinctive Ringing: By frequency (15-100 Hz) and cadence patterns
Outdoor Protection
- Over-voltage protection and surge immunity. This applies only to the MP-124 FXS telephony cables, which can be routed outdoors. In such a case, power surge protection means are required (refer to the Installation Manual for detailed instructions)
Comes as shown on picture, if something is not on the picture it's not included unless stated otherwise
dewabit