240V PRE WIRED Electric Hook Up install Kit Campervan, Motorhome

FIT&CLICK, ready to use out of the box

 

This kit is pre wired and has a click plug so you can simply unplug the

13 A socket, run the cables and then plug the corresponding plug to the consumer unit / fuse box

 Idea for a temporary power install

This kit includes the following 

 

Compact consumer unit, fitted with a RCBO combined MCB fuse and RCD safety cut out, that cuts both the live and neutral supply when switched off or is tripped.

 The power cables that enter the unit, are held in place by compression glands that will prevent any cables working loose in a vibrating vehicle.    

  A surface mount 16A van inlet socket, fitted with  2.5 meters of cable, that connects it to the fuse box,  (this plug could be removed temporarily, to help run the cable or to shorten the cable)

  1 x High Quality Satin Chrome, 13A, 2 Gang, Double Pole switched socket, made by Deta, BS1363

 and strong surface back box with 2.5 meters of cable and a click plug, that will connect it to the fuse box.

 1 x 1.5 meter chassis bonding cable with a lug pre crimped on the end and a M6 bolt and nut to be bolted to the chassis of your van.

1 x Bag of fittings.

 Fitting Guide.

 

Whist this kit is easy to fit, it is recommend that if you are in any doubt, it is fitted or checked before use by a competent person.

 

 Do see our other Campervan power install kits, including kits with flush mounted inlet sockets