Spec |
Description |
Design |
* Micro
ATX form factor 4 layers PCB size: 9.6”(W) x 9.6”(D) (245 x 244 mm) |
Chipset |
*
Intel 915GV Graphics Memory Controller Hub (GMCH) Chipset *
Intel 82801FB I/O Controller Hub (ICH6) Chipset |
CPU Socket (PLGA 775 Socket) |
*
Support Intel Pentium 4 LGA775 processor *
Support CPU Frequency 533/800MHz *
Support Intel
775 Pin Celeron
D 3xx/ Pentium
4 5xx/ 6xx processor *
Reserves support
for future Intel Pentium
4 processors |
Video Display |
* Integrated Intel High Performance
Graphics Media Accelerator 900 2D/3D, Graphics Core at 333MHz. |
Memory Socket |
*
240-pin DDRII
SDRAM module socket
x2 *
Support Memory Type
128Mbit, 256Mbit, 512Mbit and 1Gbit Technology *
Support Only 8x and 16x SDRAM device with 4 banks *
Support 1.8V DDR2 400/DDR2
533 *
Expandable to 2GB |
Expansion Slot |
*
1x PCI Express x16 slot (by 4 lines) for PCI Express VGA *
3x 32-bit
PCI slot (PCI v2.3 compliant) |
Integrate IDE |
* One IDE
interface support PCI Bus Mastering, ATA PIO/DMA and the ULTRA DMA
33/66/100 functions that deliver the data transfer rate up to 100 MB/s, support up to 2 IDE device. |
SATA |
*
Four Serial ATA host
controller with independent DMA operation on all ports. *
Data transfer rates up to 1.5Gb/s |
USB |
* 8x
USB connectors, USB 2.0 compliant (4 connectors at rear panel and 4 on board
header) |
LAN |
* Realtek RTL8100C 10/100 LAN |
Audio |
*
AC’97 Digital
Audio controller integrated *
On board Realtek ALC-655
AC’97 2.3 Audio CODEC *
2 or 6 Channel
Audio selectable *
Audio driver and utility
included |
BIOS |
* Phoenix Award 4MB Flash
ROM |
Multi I/O |
*
PS/2 keyboard and PS/2 mouse connectors *
Floppy disk drive connector x1 *
Parallel port x1, Serial
port x2 (one on header) *
Audio connector Line-in, Line-out, MIC Actual color may vary |