1.Connect the Throttle Controller with the accelerator Pedal interface
2.Stick the Throttle Controller on central console
3.Connect the plug with the Throttle Controller,bind the wire if necessary.
STEP1:
Pull away the interface of the accelerator pedal.Please refer to picture 1
Step2:
Connect the throttle controller cable plug with accelerator pedal interface .Please refer to picture 2
Step3:
Tear the protection paper on the back of Throttle Controller, and stick it on the central console
Safety Precautions:
- Before the installation, user need to check the Electronic Throttle Controller plug and accelerator pedal interface, they should be connect properly.
- After finish installation, please start engine under the Neutral Gear or P Gear,and check the accelerator pedal is work.
- If install the wrong direction, it will cause the accelerator pedal invalid and the warning light of engine will be on. If in this situation, please don't worry, this products has the internal protection circuit, which will prevent harms to the vehicle parts. Please turn off the engine and disassemble this product.After 2 minutes, install this product in the correct way,then it can work.