24Ghz Radar Blind Spot Detection System Lane Change Assistant Monitoring Safety
24Ghz Millimeter Wave Radar Blind Spot Detection System Driving Safety Lane Change Assist Blind Spot Monitoring Assistant
Product introduction:
This system product can warn the dangerous targets in the adjacent
lanes. The unique ability of 24Ghz millimeter radar to penetrate smoke,
fog and dust can realize all-weather and all-time application, detect
the objects in the signal area in real time, and calculate the speed,
angle and relative displacement of objects at the same time. It can
detect the target within 20M(65.61ft) at the farthest, and finally
output the alarm signal, which includes the first-level alarm and the
second-level alarm.
Product functions explanation:
1.After the ACC is powered on, the system can immediately enter the
working state after the environmental adaptation test. When the car is
turned off, the radar stops working.
2.The system is in the
first-level early warning state except when the turn signal lamp is
turned on, double flashing warning lamp and R reverse gear is engaged.
3.When the turn signal is turned on, double flashing warning lights and
R reverse gear is engaged, the system is in the second-level early
warning state. Level 1 alarm: the reminder light is always on. Level 2
alarm: the warning light flashes+the buzzer sounds. The alarm range is
centered on the rear of the car. The lateral distance is X and the
longitudinal distance is Y. The left lateral distance of the center is
negative, and the right lateral distance of the center is positive.
Features:
The system is a vehicle auxiliary device that can help the driver to
safely change lanes while driving. During driving, when the side and
rear vehicles are in danger of colliding with my car, the warning light
will light up to remind the driver. If the left/right turn signal is
turned on, it will be accompanied by an audible warning. The blind spot
detection starts when the car starts. When you open the door, if there
are pedestrians, cars and motorcycles on the side, it will be detected
and accurately alarmed. The blind spot detection system can distinguish
between stationary objects and moving objects. Stationary objects do not
alarm. Pedestrians and vehicles in a driving state will sound an alarm
when they are detected. When waiting for traffic lights: After parking,
the car behind is still, and the blind spot detection system does not
alarm. Normal driving: When the car behind is slower than us, there is
no danger of collision and there is no warning. Similarly, when we
overtake, the speed is faster than the car behind and there is no
warning.
Specifications:
Applicable conditions: Universal (There must be no metal objects in front of the 2 radar signals to block the radar)
Operating frequency band: 24Ghz
Electricity voltage: 12V
Power consumption: <2W
Working temperature: -40℃ ~ +85℃/-40℉-185℉
Storage temperature: -40℃ ~ +85℃/-40℉-185℉
Waterproof level: IP67
Distance resolution: 0.5m/1.64ft
Range accuracy: Superior to 0.18m/0.59ft
Detection range: Lateral distance : 0.3m-4m/0.98ft-13.12ft.
Rear side distance: 0.3m-20m/0.98ft-65.61ft
Detection range accuracy: ≥96%
System alarm accuracy: ≥96%
Alarm method: method 1 => LED light turn on. Method 2 => LED flash and buzzer sound.
Packing List: Radar*2
Power cord*1
Power extension cable*1(length 5m/196.85in)
Radar extension cable*1 (length 5m/196.85in)
Warning light extension cable*2 (the length is 4m/157.48in respectively)
Warning light*2 (lengths are 270mm/10.62in respectively)
Mounting bracket*2
Buzzer*1
Cable ties*a few
Angle ruler*1
Adhesive*2
User manual*1
Package box*1
Note: It is recommended that the installation be carried out by
professionals. The installation angle of radar will affect the detection
distance and effect. Please install it strictly according to the
instructions. Light shooting and different displays may cause the color
of the item in the picture a little different from the real thing. The
measurement allowed error is +/- 10-30mm.