For BMW:
2008-2010 BMW 128i (to 09/2010)
2008-2010 BMW 135i (to 09/2010)
2006 BMW 325i
2006 BMW 325xi
2007-2010 BMW 328i (from 03/2007)(to 09/2010)
2007-2008 BMW 328xi (from 03/2007)
2009-2010 BMW 328i xDrive (to 09/2010)
2006 BMW 330i
2006 BMW 330xi
2009-2010 BMW 335d (to 09/2010)
2007-2010 BMW 335i (from 03/2007)(to 09/2010)
2007-2008 BMW 335xi (from 03/2007)
2009-2010 BMW 335i xDrive (to 09/2010)
2006-2007 BMW 525i (from 03/2006)
2006-2007 BMW 525xi (from 03/2006)
2008-2010 BMW 528i (to 09/2010)
2008 BMW 528xi
2009-2010 BMW 528i xDrive (to 09/2010)
2006-2007 BMW 530i (from 03/2006)
2006-2007 BMW 530xi (from 03/2006)
2008-2010 BMW 535i (to 09/2010)
2008 BMW 535xi
2009-2010 BMW 535i xDrive (to 09/2010)
2006-2011 BMW 550i (from 03/2006)(to 09/2010)
2011 BMW 550i xDrive (to 09/2010)
2010 BMW 550i GT (to 09/2010)
2010 BMW 550i GT xDrive (to 09/2010)
2006-2010 BMW 650i (from 03/2006)
2011 BMW 740i (to 09/2010)
2011 BMW 740Li (to 09/2010)
2006-2011 BMW 750i (to 09/2010)
2010-2011 BMW 750i xDrive (to 09/2010)
2006-2011 BMW 750Li (to 09/2010)
2010-2011 BMW 750i Li xDrive (to 09/2010)
2006 BMW 760i
2006-2011 BMW 760Li (to 09/2010)
2008-2010 BMW M3 (to 09/2010)
2006-2010 BMW M5
2006-2010 BMW M6 (from 03/2006)
2004-2010 BMW X3
2007-2011 BMW X5 (to 10/2010)
2008-2011 BMW X6 (to 02/2010)
2006-2011 BMW Z4 (to 09/2010)
For Mini:
2007-2009 Mini Cooper (to 09/2009)
For Rolls Royce:
2007-2011 Rolls-Royce Phantom
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.