Features:
【Function】This unit can extend 1/2/4/8 channels of Balanced 3pin XLR broadcast high quality Audio over an optical fiber cableto far end. 1-8 XLR Audio signal is transmitted from T (TX) in the direction of R (RX).
【Universal for Fiber Types】The unit can work on both single-mode and multimodefiber cable. Long transmission distance: Singlemode up to 12.4 miles (20Km), Mutlimodesingle fiber up to 0.31 miles(500meters). Using low cost optical cable instead of traditional XLR audio cable, It can greatly save your engineering cabling costs ，what's more it make your audio signal not loss, more clear.
【Crystal clear sound, No Loss, No Delay】 Professionally design ,Pure and Clean fiber optic audio signal transmission. Compact design, Sturdy Metal. Bilateral heat dissipation. LEDs for power supply and optical fiber link status indication can monitor the operating status of the system.
【Wide Applications】Typically used in applications for Staging, Theaters, Stadiums, Parks, Broadcast, studio audio and professional AV applications, etc., and are available for stand-alone and desktop type, or wall mounted, installations.
【Plug and Play】No need to set up ,Simply plug in an Optical FC port and XLR audio connectors at TX and RX sides, it will have crystal clear sound instantly.
Optical Port:
Optical connector: FC (SC/ST/LC is optional).
Wavelength: 1310nm/1550nm.
Transmitting optical power: more than -7db.
Receiving sensitivity:more than-24db
Fiber: single fiber multimode (MM) or single mode (SM).
Transmission range: 0-20km for SM, 0-500m for MM.
Optical interface: SC simplex (only 1 fiber needed).
Optical fiber type: universal 9/125u single mode, 50/125u or 62.5/125u multimode.
XLR Audio Ports:
Number of Channels: 1/2/4/8 optional .
Input Connector: XLR (Female).
Output Connector: XLR (Male).
Pin wiring diagram : "1" Shield, "2" MIC AUDIO (+), "3" MIC AUDIO (-)
Input / Output Impedance: 600 Ohm.
Max input/output voltage: 4.0Vp-p.
Signal level:0.5-4Vp-p.
Sampling frequency: 192 KHz.
Audio A/D sampling:24 Bit
SNR: 100dB.
Audio interface level III lightning protection, reaching IEC61000-4-5 (8/20 μ s) Differential mode: 6KV.
General Spec:
Power Consumption: ≤8W.
Working temperature: -20°C ~ +70°C.
Relative Humidity: 0% ~ 95% (non-condensing).
MTBF: >100,000 hours.
Installation: stand-alone/Rack mount.
Support wide range working Voltage: AC100-240V50/60Hz, DC12V
Power plug：US/EU/UK/AU standard is optional.
Dimension:
1-4 Port :167mm(L)×114mm(W)×45mm(H).
8 port : 445mm(L)×220mm(W)×44.5mm(H).
Package include:
1x Balanced Audio Fiber Transmitter
1x Balanced Audio Fiber Receiver
2x Power supply adapter
1x FREE 3M Fiber patch cord
1x Manual.