Shop Categories |
|
|
Helpful Links |
|
|
|
-
Digital electric lubrication pump CNC automatic control gear oil pump 2L 220V (This item is 220V, do not support 110V)
-
Introduction: Digital electric lubrication pump, a gear pump automatic control, working time 1-999 and rest time 1-999 seconds can be arbitrarily adjusted according to minutes of machinery and equipment, with low noise, high efficiency, simple operation, applicable in, machine tools, textile machinery, elevators, woodworking machinery gears, rail lubrication, chain lubrication, etc., with the use of centralized lubrication accessories to achieve automatic timing and quantitative effect of lubrication without manual operation.
-
Parameters: Capacity: 2.0L Input voltage: 220V AC Output Power: 25-60W Current: 0.35A Rated pressure(kgf/cm2): 15kg Max. pressure(kgf/cm2): 15-35kg Volumetric efficiency: ≥75% Discharge volume(cc/st): 110-140cc/min Oil viscosity(c.st): 30-1000c.st
-
Features: 1. Pump volume: 2.0L 2. Easily installation, access to 220V power supply directly. 3. Fitted with oil shortage warning device, controller is dual relay, with the level signal output port 4. The pump setting adjustment range of time, work time 1-999 seconds, intermittent time 1-999 minutes. 5. Standard export of pump is M10*1, Pick φ6mm tubing(if you need φ4mm, pls let us know before you order.) 6. This YS-2232-210X Lubrication Pump come with the functions of oil shortage warning, underpressure warning and Oil leakage warning.
-
Operations: 1. SET key: press this button to re-supply oil or reset to eliminate abnormal sound. Press and hold the key for 2 seconds to set the ACT time. Press and hold the key again for 2 seconds to set the INT time, and then press the key for a long beep. The setting is completed. 2. UP/DOWN key: Modify the fuel (1-999 seconds), intermittent time (1-999 minutes) value. 3. RESET key: this key function as the "SET" button, press this button to re-supply oil or reset to eliminate abnormal sound. 4. When the lubrication pump is powered on, the system is in the state of fuel supply and enters the ACT and INT cycles. When the fuel is supplied, the ACT lamp is on and the INT lamp is on when it is off. The display time is decremented by the set value 5. "ErO" flashes to indicate insufficient fuel, "ErP" flashes to indicate abnormal pressure, and "ErS" flashes to indicate system out of operation. What in Package: 1 x 2L Auto Lubrication Pump
|
|