*CANBUS ERROR FREE:
No. For some vehicles, it may require install decoder or load resistor（not included） to avoid turn signal hyper flash or fast blinking.
(We are also selling resistors , If you want, please feel free to contact us for a discount.)
No. For some vehicles, it may require install decoder or load resistor（not included） to avoid turn signal hyper flash or fast blinking.
(We are also selling resistors , If you want, please feel free to contact us for a discount.)
Features：
*200% Brighter: Truly 40W, 6000LM, 6000K White per pair with a better intense and focused light output, 200% brighter as orignal H7 halogen bulb, make you see more clearer at driving in the dark/night.
*Clear Beam Pattern: 1:1 filament design same as halogen bulbs, CHUSYYRAY customzied led chips, same output as halogen bulb with a clear cut off line. No blind oncoming traffic.
*Efficient Cooling System: Whole aviation aluminum body, unique hollow-carved heat sink design with Intelligent IC make sure the LED conversion kits last longer.
*5 Minutes Installation: No Polarity, same structure design as halogen bulb, just Plug & Play.
Specification:
Plug Type: H7,High low dual Beam
Power(per set): 60W
LED Quantity(ech bulb): 4pcs* COB chips
Luminous Flux: 12000lm/set(6000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure White 6000K
Waterproof rate: IP67 rated water and dust seal
Lifespan: Over 50000hrs lifetime
Beam Angle: 270 degree@low beam,360 degree@high beam
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Usage: headlight,fog light
Warranty
* 5 Year Warranty. (If any quality problem we'll send free for replacement).
* 5 Year Warranty. (If any quality problem we'll send free for replacement).
Package Included:
2x H7 LED headlight bulbs
(packaged with original box)
2x H7 LED headlight bulbs
(packaged with original box)
Installation Notes:
1.As a safety precaution, make sure that the car has had time to cool down properly before
starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs
with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light
shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
1.As a safety precaution, make sure that the car has had time to cool down properly before
starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs
with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light
shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
Warm Tips
1. Not available for aftermarket assembly of U.S. vehicles.
2. This H7 can fit high beam, low beam or fog light, it depends on your factory halogen bulbs, here are tips of how to know the bulb size of the vehicle:
1) Check your vehicle user manual or original halogen bulb, the part number is marked above.
2) Search "automotive bulb look-up" online, and enter your vehicle info to find out the correct size.
3) Contact seller, write down your vehicle year, make, model, and the position you want to replace, we will help you check.
1. Not available for aftermarket assembly of U.S. vehicles.
2. This H7 can fit high beam, low beam or fog light, it depends on your factory halogen bulbs, here are tips of how to know the bulb size of the vehicle:
1) Check your vehicle user manual or original halogen bulb, the part number is marked above.
2) Search "automotive bulb look-up" online, and enter your vehicle info to find out the correct size.
3) Contact seller, write down your vehicle year, make, model, and the position you want to replace, we will help you check.
Q1: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include some vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
Q2: My item has not arrived, what's taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
Q3: Do I need to mention the Year, Make and Model in the notes when place order?
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
Q4: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
Q5: WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
【Service Guarantee】Thanks for visiting our Store! We try to accurately describe our item to the best of our knowledge, if there is any incorrect, please feel free to let us know via message.
【Contact us】We hope you can contact us via message with any issue before you decide to leave neutral or negative feedback or open return request or case. We will reply to you as soon as possible when we see your email at work.
【Contact us】We hope you can contact us via message with any issue before you decide to leave neutral or negative feedback or open return request or case. We will reply to you as soon as possible when we see your email at work.
On Nov 11, 2023 at 01:06:18 PST, seller added the following information: